广东邦技硅胶分散搅拌机精良加工设备动力混合机双螺旋粉料混合机定制

广东邦技硅胶分散搅拌机精良加工设备动力混合机双螺旋粉料混合机定制
涂料设备釜内动态混合和釜外静态混合的完善结合，保证颜料和高粘度树脂的高度分散和充分混合。高剪切一体化涂料成套设备釜内高剪切和釜外高剪切粉碎功能和高粘度树脂的高度分散和充分混合。
一罐的容积可在800-1000l之间选择，二、三罐的容积可在1000-2000l之间选择。
年产量：500-1000吨占地面积：40m2（设备长13米，宽3米，高3.2米）
为您提供系列胶体磨、三辊机、立式砂磨机、卧式砂磨机、篮式砂磨机、滚坛机、球磨机、升降高速分散机、搅拌机、乳化机以及涂料生产成套设备等。
六、几种密封的使用条件
1.通常在常压或低压条件下采用填料密封，一般使用压力小于2公斤。
2.在一般中等压力或抽真空情况会采用机械密封，一般压力为负压或40公斤。
3.在高压或介质挥发性高得情况下会采用磁力密封，一般压力超过14公斤以上。
除了磁力密封均采用水降温外，其他密封形式在超过120度以上会增加冷去水套
技术参数：
设计容积：50l-30000l(体积可以按照要求设计。)
反应温度：常温-300℃。
反应压力：-0.1-0.6mpa。
设备材质：sus304不锈钢、sus321不锈钢、sus316l不锈钢或q235-b碳钢。
搅拌形式：桨叶式、锚桨式、框式、螺带式、涡轮式、分散盘式、组合式等。
加热方式：电加热、蒸汽加热、水浴加热。
导热介质：导热油、蒸汽、热水、电加热。
传热结构：夹套式、外半管式、内盘管式
产品英文详情介绍
state technology guangdong silica dispersion stirrer processing equipment power mixer powder double helix mixer outer custom dynamic mixing apparatus and the paint tank static mixing vessel perfect binding, ensure highly dispersed pigment and a high viscosity of the resin and mixed thoroughly. highly dispersed and high shear mixing sufficiently integrated within an outer coating pot high shear equipment and high shear shredding vessel and the high viscosity of the resin. jar volume may be between 800-1000l selection, two or three volumes of the tank may be selected between 1000-2000l. annual production: 500-1000 tons area: (13 m equipment long, 3 meters wide, 3.2 meters high) 40m2 provide you with series colloid mill, three-roll mill, vertical sand mill, horizontal sand mill, basket sand mill, roller altar, a ball mill, the lifting speed disperser, mixer, emulsifier coating production equipment and the like. sixth, the sealing conditions of use 1. several commonly used packing at atmospheric or low pressure conditions, typically using a pressure of less than 2 kg. 2. in a typical medium pressure or vacuum will continue to apply a mechanical seal, or a negative pressure is typically 40 kg. 3. in the medium or high pressure high volatility will continue to apply a magnetic seal, the pressure is generally more than 14 kg. in addition to a magnetic seal outer water cooling are used, other forms of seal will increase in more than 120 degrees of cold water to a set of technical parameters: design volume: 50l-30000l (volume may be designed as required.) reaction temperature: room temperature -300 deg.] c. reaction pressure: -0.1-0.6mpa. device material: sus304 stainless steel, sus321 stainless steel, sus316l stainless steel or carbon steel q235-b. forms of agitation: paddle, an anchor paddle, frame type, a ribbon type, a turbine type, a dispersion disk, combination and the like. heating: electric heating, steam heating, water bath. heat transfer medium: conducting oil, steam, hot water, electrical heating. heat transfer structures: jacketed, tubular outer half, the inner coil of formula
查看其它相同标签的文章：搅拌机搅拌机搅拌机搅拌机