altri-sp-880s胶衣树脂用防浮色助剂
wetting and dispersing additive for ambient-curing plastic systems and so*ent-borne coatings to achieve pigment stabilization and to reduce fl ooding/fl oating. contains silicone.
product data
composition
solution of a low molecular weight, unsaturated acidic polycarboxylic acid polyester with a polysiloxane copolymer
typical properties
the values indicated in this data sheet describe typical properties and do not constitute specific action limits.
acid value: 150 mg koh/g
density (20 °c): 0.95 g/ml
non-volatile matter (10 min., 150 °c): 80 %
so*ents: alkyl benzenes
flash point: 44 °c
storage and transportation
separation or turbidity may occur during storage and transportation. mix well before use. warm to 30-60 °c and mix well.
special note
white spirit-based coating systems or those that are diluted with white spirit have a limited compatibility.
applications
ambient-curing plastic systems
special features and s
altri-sp-879s improves the dispersion of all conventional fillers, such as calcium carbonate and aluminum hydroxide. it reduces the viscosity of the filled resin, which enables increased filler content. in the majority of cases, the settling of the filler is significantly reduced during storage and when processing. altri-sp-879s is suited to stabilizing pigments in gel coats. the additive also contains a small quantity of a polysiloxane copolymer to reduce fl ooding and floating. this prevents the formation of bénard cells and improves the surface slip and leveling
recommended levels
0.5-1.5 % additive (as supplied) based upon the filler.
the above recommended levels can be used for orientation. optimal levels are determined through a series of laboratory tests.
coatings industry
special features and s
the additive provides a targeted, controlled fl occultation of the pigments. the system builds bridges between the individual pigment particles, thereby creating three-dimensional networks. this controlled
fl occultation of the pigments primarily prevents flooding/floating along with settling and sagging. altri-sp-880s is suited to stabilizing pigments in industrial coatings and architectural coatings. it increases gloss, prevents floating and reduces the mill base viscosity. the additive also contains a small quantity of a polysiloxane copolymer to reduce flooding and floating. this prevents the formation of bénard cells and improves the surface slip and leveling, and also the orientation of matting agents and aluminum pigments.
in the majority of cases, it is no longer necessary to add the silicone additives which are usually required.
recommended levels
amount of additive (as supplied) based upon pigment:
inorganic pigments: 3-10 %
titanium dioxides: 1-3 %
organic pigments: 8-16 %
the above recommended levels can be used for orientation. optimal levels are determined through a series of laboratory tests.
黄山澳盛源新材料科技有限公司
刘涛
13965503650
黄山市经济技术开发区梅林大道