供应SD多功能模具安全检出装置

sd multi-funcion mold detector
电源电压可由ac85-264v范围内稳定工作，电源不稳定地区最佳选择。针对连续冲压设计，取代人工监控凡举，材料中断，弯曲挤料，送料不足，送料过长，落料不良，成品吹出…等，均可适时检出停机，以保证模具及冲床。
the mechanism can still be normally operated when the power source ranges from ac85-264v..a multi-function monitor is designed to detect the working environment of the press dies.lts function includes material mis-feed,ejection detection,and end of material. hhnce it can be applied to protect dies and mechanism, and eliminate defects during producing.
特点：features:
sd-101多功能主控制器sd-101multi-function controller
1. 安装简单，多样化应用。lt is easy to instrall and has various application.
2. 各回路均可作a（常用）b（常闭）检测方式切换.each loop can switch over both a (normal open)andb(normal close)
3. 各回路均可有指示灯，极易寻找停机原因。each loop has a indicator so the trouble s-hooting is ver easy.
4. 电源电压：ac85-264v。power source:ac85-264v.
5. 两组接点输出（ac240v5a，cos￠=1）。output relay 2c（ac240v5a，cos￠=1）。
6. 可加装近接，微动，光电…等各种感测器。various sensors,le,electro-optics sensor and proximity sensor,micro switch,etc.can be added easily.
7. 反应速度20m/s以下。delay time under 20m/s.
ls-100/150通过检出器ls-100/150 pass through detector ls-100/150
1. 高感度红外线光幕反射式,稳定性最佳。the stability of the detector with infrared ray optical shell is very high.
2. 应答速度最高100m/s￠2以上透明体均可检出。lt can detect the nontran sparent boby which is upon response speed 100m/s￠2
3. 设定距离150mm-1000mm,感应度可调整。the resolution of the detector is adjustable.li-ght emitting distance 150-1000mm.
4. 静止的物体不会检出（如模板等）。the nonmoving object can not be detected.
5. 电源电压dc12v，可与sd-101直接配合。supply voltage dc12v,lt can be connected to sd101 as it is .