Digital Chemical Agitator Liquid Overhead Stirrer Mixer Laboratory Overhead Stirrer

Product Description

Product DescriptionOverhead stirrer mixer is a dependable and enduring option for blending various laboratory samples, allowing for efficient mixing of liquids or solutions in various containers, such as beakers or flasksSpeed: 30 - 2200 rpm; maximum applicable viscosity: 10000 mPa·s; torque: 40 N.cmWith user-friendly interface and reliable performance; features an LED screen display; allows both rough and fine speed adjustments; the speed can be adjusted even during operation; smoothly accelerates while in operation to effectively prevent sample splashingThis mixer is equipped with motor protection and overload protection as well as penetration holesHigh-quality Mobile Digital Display Overhead Stirrer machine.With high capacity chamber for long-lasting durability, the compact design ensures efficient use of space.Featuring double temperature and double pressure settings at 121ºC/0.12Mpa and 134ºC/0.22Mpa, this 1000W high-power machine delivers top-notch efficiency. Plus, the intelligent chip temperature control ensures smart operation.Prioritizing your safety, our SCIENTIFIC Overhead Stirrer Stirrer Hot Plate
automatically cuts off the power supply in case of internal temperature Digital Display Overhead Stirrer. The safety valve adjusts the internal pressure, and if it exceeds the standard value, it will automatically vent.The steam equipment has the function of pressure adjustment: adjust the inter pressure, if over standard value automatic vent. The Mobile UV air PRP PPP Laboratory Hot Plate Digital Display Overhead Stirrer has the function of avoild overheat protect device: when inter temperature overheat, power break electric current automatically.With PTFE shaft can be choose
Product Parameters

Max. stirring quantity	20L/40L
Power	70W
Motor type	brushless DC motor
Motor input power	60W
Motor output power	50W
Speed range	50-2200rpm
Speed display accuracy	±3rpm
Speed display	LCD
Torque display	LCD
Voltage	100-220V, 50/60 Hz
Overload protection display	LED lights
Max. torque	40Ncm
Viscosity max.	10000mPas
Chuck range diameter	0.5-10mm
Dimension[W×D×H]	83x220x186mm
Weight	2.8kg
Protection class	IP21
Permissible ambient temperature and humidity	5-40°C80%RH
Data connector	RS232

Production workshopThe production of the Pyroceram Top Hotplate introduce
1.Start by the blanking process for the metal part
Normally the house of the Lab Dry Bath Incubator Heater machine medical was made by the steel or stainless steel of type as 316
The part was beginning as the blanking
1.Laser blanking machine capacity :8000*2000*10mm
2.We had about 15 pcs of the laser cutting machine in blanking workshop ,name from No1 to No 15,
3.6S fully carry out in our workshop according to the iso13485,
4.All of the raw material can be Traceability2.Bending process for Lab Dry Bath Incubator Heater by the press break bending machine The press brake machine is a powerhouse in the metal fabrication industry, providing an efficient and successful method to bend sheet metal into different forms
To form the metal part into the shape we need ,the first part was by the bending press and the bending die Stainless Steel :Provides great strength and resistance to corrosion, but its greater spring back the ability to revert to its original shape after bending means that it must be handled carefully.
3.Progressive die metal stamping workshop for Lab Dry Bath Incubator Heater part.Overhead Stirrer Hot Plate Max 716°F, 100-2000RPM Hot Plate with Overhead Stirrer, 2000mL Overhead Hotplate Stirrer, Overhead Stirrer w/Overhead Stir Bar
need the bracket for the motor and metal stamping part for the housing and electric connect part,The progressive die stamping can give out the huge volume and low cost for the LED Digital Hotplate Overhead Stirrer Hot Plate with Ceramic Coated Lab Hotplate, 280ºC Stir Plate, Overhead Mixer 3,000mL Stirring Capacity, 200-1500rpm, Stirring Bar Lab Equipment machine spare metal part.4.Welding workshop for the Overhead Stirrer Hot Plate Mixer The Medical Sterilization machine need a lot of welding ,to imporve the capacity and welding quality we introduce the welding robot machine instead of labor human welding
1.QTY of the welding robot :23pcs
2.Capacity of the welding robot :500A
3.Work station:2000*1500mm5.Plastic injection workshop for the Benchtop Hot Plate OverHead Stirrer with Time Setting Speed Adjusting Stirrer Mixer machinePlastic part was one part of theLaboratory Thermostatic Heater machine
We had about 10 sets of the plastic injection work for the Laboratory Thermostatic Heater machine.
1.The capacity for plastic injection machine was :1000*850*750mm
2.The max ton for plastic injection machine was 1000T6.The spare part Warehouse for the benchtop Stainless Steel Multifunction Steam Sterilization machineThe 6S was fully carry out in our warehouse with the ERP system
1.We need to know how many part in our warehouse
2.We need to anticipate the part when to full fill in for all the benchtop Laboratory Thermostatic Heater with Drying Function Water Storage Tank 7.CNC machining for the benchtopHot Plate OverHead Stirrer with Time Setting Speed Adjusting Stirrer Mixer Machine Equipment.The rotor was the key part for the Hot Plate OverHead Stirrer with Time Setting Speed Adjusting Stirrer Mixer Equipment ,to make it perfect especial for the high speedHot Plate OverHead Stirrer with Time Setting Speed Adjusting Stirrer Mixer Machine Equipment ,we need to control the tolerance of the rotor very tight,that was why we introduce the Hot Plate OverHead Stirrer with Time Setting Speed Adjusting Stirrer Mixer Machine Equipment
1.CNC QTY:15PCS
2.Tolerance for CNC machine :0.01mm8.Hot Plate OverHead Stirrer with Time Setting Speed Adjusting Stirrer Mixer Machine stamping ,welding ,rolling Production process on site,the container of the Medical Sterilization Lab Equipment Vacuum Steam Hot Plate OverHead Stirrer with Time Setting Speed Adjusting Stirrer Mixer Machine Machine need the vacuum and seal can bear though high pressure
9.Electric part assemble to the Multifunction Steam Sterilization Machine workshop,the plc or the other computer control part connect to the machine before move to the next production procss.10.Test workshop for the Multifunction Steam Sterilization Machine All Multifunction Steam Sterilization Machine need to be test before transfer it to the warehouse.Customer visitCustomer review our Laboratory OverHead Stirrer with Time Setting Speed Adjusting Stirrer Hot Plate Mixer Machine workshop,We were welcome all of our customer to visit our company to review and test the OverHead Stirrer with Time Setting Speed Adjusting Stirrer Hot Plate Mixer Machine for Organisms, Medical, Chemistry,Our business vision was :long term business ,win-win for the future
Packing and loadingThe over sea customer always concern about the packing and loading for the OverHead Stirrer with Time Setting Speed Adjusting Stirrer Hot Plate Mixer Machine,we cant bear the lost for tiny mistake for the Vacuum Steam Machine machine ,one mistake will cause the machine broken or cant work .
From the packing for Laboratory Medical Sterilization Machine to the container loading detail show as below Warehouse and stroage for the medical Medical Sterilization Machine,the temperature should be control within 18-25° for all equipment and test machine ,all the record can trace within 3 years.
After market serviceThe maintain and repair guarantee for the Medical Sterilization Machine workshop was the key to the business ,when a customer bought a machine from us ,the guarantee was the most importance things customer concern.we sent out technical service team to oversea customer site for the maintain and repair for our customer .Our service for the lab equipment was not stop after the Vacuum Steam Machine Machine sold ,it was the start for our company and your company for win win situation .You use the Vacuum Steam Machine Machine we take care of the rest.
ExhibitionWe take part into the MedtecChina Canton Fair (The China Import and Export Fair) exhibition every year ,hope one day we can meet each on the fair
Our visionThe supplier and the customer was togeher for the future ,both parties should be in win-win situation ,so we were looking forwarder to hold hand by hand for bright future.
Digital Overhead Stirrer:Excellent corrosion resistance .Brushless DC motors with low noise for high safety and maintenance-free.Equipped with two mixing paddles to meet your different needs.Self-lock drill chuck design,easy operation
Precise Digital Control/ Timing Function:Competent for high-load and long-term continuous work with outstanding performance.The range of rotate speed is 100-1500 rpm and time range is 0-999min.The LCD displays the set and actual speed values and can monitor the speed and time in real time. With a power rating of 50W,a torque of 40N.cm
Wide Application:This overhead stirrer mixer with max viscosity up to 20,000mPa·s can mix the liquid with the high viscosity, like lotion,honey. Torque can be adjusted automatically based on the changes of sample viscosity. Capacity reach up tp 20L,it is widely applied to laboratories,university,food industries,petroleum,chemical and so on.
Overload protection: It will automatically stop in case of overload to ensure safe operation.Prevention of sample overflow: It is started smoothly, which can effectively prevent the sample from overflowing.Safety circuit setting: The circuit is automatically shut off in case of an abnormal condition to ensure user safety.
Excellent After-sales Protection We back the lab overhead stirrer mixer with a 1 Year Warranty. Any question, please contact us at the first time, we are here to serve you!