Clarnate Wb2032 Wanhua PC Resin Polycarbonate to Produce Water Bucket and Bottles

Product Description

Product Description

CLARNATE®WB2032 Polycarbonate Resin
		General Information
Features		·Branching	·High Viscosity	·Food Contact
Appearance		·Blue/Transparent
Forms		·Pellets
Processing Method		·Injection Molding	·Blow Molding

Product Parameters

		Test Method	Test Condition	Unit	Typical Value
Physical
Melt Flow Index		ASTM D1238	300ºC/1.2Kg	g/10min	3
Mold Shrinkage		ASTM D955	-	%	0.5-0.7
WaterAbsorption		ASTM D570	23ºC,24h	%	0.2
Density		ASTM D792	-	g/cm³	1.2
Mechanical
Stress at Break		ASTM D638	50mm/min	MPa	70
Tensile Modulus		ASTM D638	1mm/min	MPa	2200
Yield Stress		ASTM D638	50mm/min	MPa	65
Strain at Break		ASTM D638	50mm/min	%	130
Flexural Strength		ASTM D790	2mm/min	MPa	95
Flexural Modulus		ASTM D790	2mm/min	MPa	2300
Izod Notched Impact Strength		ASTM D256	23ºC	J/m	900
Thermal
Heat Distortion Temp.		ASTM D648	1.82MPa;3.2mm	ºC	129
Vicat Softening Temp.		ASTM D1525	120ºC/h;50N	ºC	149
Date of issue: Mar. 01, 2021				CLARNATE®
Version: 2.0
			1 / 3
CLARNATE®WB2032
	Typical Properties
	Test Method	Test Condition	Unit	Typical Value
Optical
Haze	ASTM D1003	3mm	%	0.8
Light Transmittance	ASTM D1003	3mm	%	60
Processing Condition
Drying Temperature			ºC	120
Drying Time			h	5
Injection Temperature			ºC	280-300
Mold temperature			ºC	80
For more information about safety and environment, please refer to our MSDS or contact our
customer service center.
Date of issue: Mar. 01, 2021				CLARNATE®

Company Profile
Hoskimi Technology (Shanghai) Co., Ltd. Was established in 2010 and is located in Shanghai Hongqiao West Business District. It provides customers with timely technical service support, diversified multi-brand material supply, and optimal material selection suggestions and combinations. It has modern warehousing services and is committed to providing customers with the best cost-effective solutions and stable & reliable supply resources.Plowing in the automotive industry for 14 years, has a wealth of experience in the automotive industry development and after-sales service, with Mercedes-Benz, BMW, Tesla, SAIC and other major automotive OEMs and Tier 1 Glammer, Xinquan, Changzhou Interior and other close cooperation, in the project there are many successful cases, such as SAIC RX5, SAIC MG SUV, SAIC Audi A7, Lixiang L6, Mercedes-Benz C. Class, SAIC Motor General Motors and etc. Applications
Packaging & Shipping
FAQ
Q: Where is your company based?
A:Our company located in Room 501, 5/F, Xin'ao Business Building, No. 720 Huajiang Road, Jiading District, Shanghai, China.
Q:What can you buy from us?
A: PC, PC/ABS, Polymethyl methacrylate, ABS, PA, POM, TPE, TPV and Etc.
Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.
Q:What are your terms of payment?
A:T/T, L/C,. Option A:30% pay in advance, 70% before shipping
Q: What is your packing?
A:Basically our packing is in 25/KG bags.
Q:Where is the loading port?
A:Usually Shanghai.
Q:What is the normal lead time?
A: We will send goods to departure port within 5-10 workdays after we receive your payment.
Q:If any quality problem, how can you settle it for us?
A: When discharging the container, you need to inspect all the goods. If any breakage or defect products were found, you MUST take the pictures from the original carton. All the claims must be presented within 7 working days after discharging the container. This date is subject the arrival time of container. We will advise you to certify the claim by third party, or we can accept the claim from the samples or pictures you present, discharging of the container is not included. Finally we will completely compensate all your loss.