Fiberglass Direct Roving for Weaving

Product Description

Description: Compatible with UP\Vinyl ester and Epoxy resins;
Size: Linear Density:300tex,600tex,1200tex,2400tex,4800tex;
Lead Time:10days for 1*20FCL
Product Properties:
1. Fast and complete wet-out
2. Good integrity and ribbonization
3. Good moisture resistance and low fuzz
4. Good weaving properties
5. Good mechanical properties
Package: The roving to be packed on 20 pallets for a 20' container. The detailed package is listed as follows;4 X 4 rolls/layer, 4 layer/pallet, 10 pallets ,4 X 4 rolls/layer, 3 layer/pallet, 10 pallets. Each layer is seperated with paperboard. Each pallet is supported by very strong papercoil at the four corners of pallet, then packed in big carton, wrapped in a polythene stretched film. The roving on pallet after package is visible.
Storage: Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the room temperature and humidity should be always maintained at 15ºC-35ºC and 35%-65% respectively. To ensure safety and avoid damage to the product, the pallets should not be stacked more than three layers high. When the pallets are stacked in 2 or 3 layers, care should be taken to correctly and smoothly move the top pallet.
Direct roving for weaving is produced by directly winding a certain number of individual fibers from the bushing without twist. It is coated with a silane based size and is designed for reinforcing UP resin. And the roving is specially used to produce woven roving used as reinforcement for boats and chemical storage tanks.
Linear density(%)ISO 1889: ±5
Moisture content(%)ISO 3344: ≤0.10
Size content(%)ISO 1887: 0.65±0.15
Breaking strength(N/tex)ISO 3341: ≥0.45
Net weight(kg): ≥13.0