DCP02 DCP10 Robot system card ABB imported module

Product Details

Product Description

Product Description
DCP02 DCP10 Robot system card ABB imported module
DCP02 DCP10 Robot system card ABB imported module
Our Email: 2235954483@qq.com
contact number:13313705507
contacts：HE
In colder climates (ambient temperatures 0°F to -40°F) this cold weather
enclosure (CWE) allows mounting of the NGC directly on the pipe. This insulated
weatherproof enclosure has brackets for the NGC, a small start up/calibration
bottle and a removable plug that allows installation of the enclosure over the
probe. This keeps the entire sampling system heated to prevent liquid
condensation of the sample prior to analysis (see Figure 1—21). Having the
calibration bottle in the heated enclosure ensures a much more stable and
consistent calibration.
1.16.1 Enclosure
The heater and enclosure is designed to maintain a 40°F inside temperature when
outside temperature is -40°F. The enclosure assembly is 31” x 31” x 31” (inside
dimensions) and is made of polyurethane with hinged cover, access and precut
holes.
1.16.2 Heater Options
Options for this enclosure include a choice of either a 400 watt 120 volt A/C heater
(thermostat present at 50°F) or a 1500 Btu/hr. catalytic heater (thermostat preset
at 50°F).
1.16.3 Mounting Options
The CWE may be mounted directly on the pipe run, with or without the sample
probe enclosed. Optional support leg(s) are available for added support when
mounted on the pipe run.
Optionally, a free-standing kit may be used to mount the enclosure next to the
meter run.