Module spare parts 133819-01

Product Details

Product Description

Product Description
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

133819-01

1. Occlusion port 5. Select PARK CIRCUIT. • The display will show: Patient circuit is occluded and the ventilator is in Standby. Setting Favorites Up to four Favorite procedures may be selected to show on the upper-right corner of the user interface. 1. Select Menu. 2. Select Procedures, Lung Mechanics, or Suction menus. 3. Select Assign Favorites. The Assign Favorites menu shows with a list of the following procedures: Increase O2, Suction, Auto PEEP, Inspiratory Hold Expiratory Hold, P 0.1, NIF, Vital Capacity, and Manual Breath. 4. Select up to four Favorites. Favorites show in the upper right corner of the display. The following Favorite procedures begin automatically after they are selected: Manual Breath, Suction, and Increase O2. Note CARESCAPE™ R860 6-14 2065490-001 7 Procedures Procedures Suction.......Closed Suction: Any ventilation modes and settings may be used with a closed suction catheter. Patient Disconnected, RR low, MVexp low, VTexp low, Apnea, and other alarms may occur during use of a closed suction catheter. Open Suction: To perform suctioning without nuisance alarms, an open suction procedure is provided by the ventilator. The Open Suction procedure has three phases: Suction oxygenation - Phase 1: The ventilator delivers increased oxygen at the current Increase O2 setting (factory default value is +25% for neonatal or 100% for pediatric and adult) for two minutes or until the patient is disconnected. Suction Standby - Phase 2: The ventilator enters Suction Standby for two minutes or until the patient is reconnected. Oxygenation - Phase 3: The ventilator resumes ventilating at the current Increase O2 setting delivering the increased oxygen value for two minutes. If the current set value is 1 cmH2O or less, PEEP or Plow will be increased to a minimum value of 1.5 cmH2O to better detect a patient disconnect condition during the Suction procedure. 1. Select as a Favorit