Self-Diagnosis Technology Hydraulic System Pump Truck

Product Description

Product Description

ADVANTAGES AND CHARACTERISTICS OF 62 MATER CONCRETE PUMP TRUCK
Worry free annual registration inspection:
The vehicle weight and front and rear axle loads comply with regulations, making it easy to register;
Large displacement:
With a large capacity hopper and a pumping system with a golden inclination angle, the suction performance can reach 95%, and the maximum displacement can reach 180m3/h;
High pressure:
The pump outlet pressure is greater than 12MPa, the direction change is strong, it can eat coarse grains, and the probability of pipe blockage is reduced by 50%;
Energy saving:
The two core energy-saving technologies of engine power self matching and casting energy-saving valve groups reduce pressure loss by more than 25%;
High intelligence:
Intelligent arm frame 2.0, safer and more convenient construction; More than 200 fault self diagnosis functions have reduced troubleshooting time by over 70%;
Small turning radius:
The load-bearing capacity of the five bridges, the body length of the four bridges, the turning radius, vehicle length, and leg span are the same as the classic four bridges of 62 meters;
Specialized integrated chassis:
600L large fuel tank, with a 50% increase in endurance; 630mm wide oversized sleeper for more comfortable rest.
Product Parameters

NO	ITEMS	NO	ITEMS
1	Boom Assembly	6	PTO
2	The Upper Support	7	Electrical Assembly
3	Frame	8	Hydraulic System
4	Pumping System	9	Pneumatic System
5	Outrigger Assembly	10	Chassis

FAQ
HOW IS YOUR PRICE COMPARED WITH MANUFACTURERS/FACTORIES?
We work as the leading dealers of various leading China construction machinery manufacturers/factories, and are constantly treated with best dealership price. From numerous comparison and feedbacks from clients, our price is more competitive than the price from manufacturers/factories.
HOW IS YOUR DELIVERY TIME?
In general circumstance, we can have an immediate delivery of regular machines for our clients within 7 days, because we have a variety of resources to check machines in stock, locally and nation widely, and to receive machines in timely manner. But for manufacturers/factories, it will take more than 30 days to produce the ordered machine.
WHICH PAYMENT TERMS CAN YOU ACCEPT?
Normally we can work on T/T term or L/C term. sometimes DP term.
(1)On T/T term,30% down payment is required in advance, and 70% balance shall be settled before shipment, or against the copy of original B/L for long-term cooperation client.
(2)On L/C term ,a 100% irrevocable L/C without "soft clauses" from an international recognized bank can be accepted. Please seek the advice from the individual sales manager whom you work with.