DTWMAC Brush Sanding Machine DT1300-6S for Furniture Polishing

Product Description

Detailed Photos
In this brush sanding machine DT1300-6S, three inner structure can be chosen. 1. Two stations of small rollers+ two stations of disc rollers+ two stations of long drum rollers (if the material has both cross and vertical groove, this structure is recommended)
2. Two stations of disc rollers +four stations of long drum rollers (If the material has mainly vertical groove, this structure is recommended)
3. Four stations of disc rollers+two stations of long drum rollers (If the grooves on the material is complicated, this structure is recommended because disc rollers can sand most area of the material)
Product Parameters

Max Working Width	1300mm
Max Working Thickness	10-160mm
Min Working Length	≥350mm
Roller Speed	Inverter Control
Conveyor Speed	5-20m/min
Long Roller Motor	1.5KW×2
Conveyor Motor	1.5KW
Lifting Motor	0.55KW
Disc Motor	1.5KW
Disc Swing Motor	0.55KW
Small Roller Motor	1.5KW*2
Small Roller Swing Motor	0.55KW
Total Power	10.65KW
N. W.	1900KG
Packing Dimension	3180*2130*2150mm
Using Dimension	3650*2050*2160mm

Packaging & Shipping
FAQ
1. Do you offer installation?
Our brush sanding machines are almost assembled and adjusted before package. It's very easy to install the machines at your workshop when you receive them. Videos guidance and English manuals can help you in installation easily. 2. Where can we buy the replacement parts?

Most of the parts for brush sanding machines are ready in stock. They can be sent to you directly from our warehouse with cost price. 3. What technical support do you offer?

* Technical support by phone, email, video * English version video and manual * Engineer available to service machinery overseas 4. Can you customize the machine for our products?
All brush sanding machines can be customized according to your requirement not only the appearance but also the inner structure.