AIP578

Product Details

Product Description

Product Description
Brand:YOKOGAWA
Type:AIP578
Origin:the United States
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.
Spare parts spare parts, the main DCS control system of PLC system and the robot system spare parts,
Brand advantage: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts
required Certificate of Compliance (CF-1R form) using the information in this table. Forms must be shown on the plans and stapling is not permitted. Table 9 is based on Climate Zone 7. Some areas of San Diego are in Climate Zone 10. 3. Fenestrations Manufactured fenestration (glazing) products must be labeled with certified U-factor, SHGC and infiltration certification. The rough opening and U- factor of all windows and doors with glass must also be noted on the plans (2019 Residential Compliance Manual 3.5). 4. Luminaries All luminaries installed in residential construction must qualify as “high efficacy luminaires” which, apply to all indoor and outdoor lighting attached to single family buildings (2019 Energy Standards 6.1). E. Electrical Electrical drawings are not required for single family or duplex residential projects. The electrical system must be installed per the current edition of the California Electric Code and compliance will be verified at the time of inspection. See Figure 13 for location of smoke and carbon monoxide alarms and for exhaust fan requirements in bathrooms. F. Plumbing Plumbing fixtures shall be shown on the floor plan. Piping material must also be noted on the plans. All new plumbing fixtures must comply with the California Plumbing Code and the California Green Building Standards Code. G. Zoning and Planning The following regulations typically apply to residential additions and alterations. Please consult the City of San Diego’s Municipal Code for all zoning regulations that may apply to your project. Regulations SDMC Section Residential Base Zones……………………………………………………….131.0401 Planed Districts…………………………………………………………………..151.0101 Brush Management…………………………………………………………...142.0403 Landscape………………………………………………………………………….142.0401 Environmentally Sensitive Lands………………………………………..143.0101 Parking……………………………………………………………………………….142.0501 Overlay Zones…………………………………………………………………….132.0101 H. Historic Review 1. Historical Review - Designated Historic If the project involves any parcel containing designated historical resource, or is located within the boundaries of an adopted historic district, plans will be required and shall be submitted for Historical Review. Please refer to Information Bulletin 581, Designated Historical Resource Review for additional Historic Review information. 2. Historical Review - Potential Historic Resource If the site contains buildings or structures 45 years old or older, and the scope includes any exterior work (except in-kind roof repair and replacement), plans and other information will be required and shall be submitted for Historical Review. (For other potential historic review exemptions, see Municipal Code Section 143.0212). See Information Bulletin 580, Potential Historical Resource Review for supplemental submittal requirements.