Dental Wireless Curing Light Dentist Cordless LED Curing Lamp Oral Machine

Product Description

Light-curing machine instructions for use
General Introduction:
1.This light-curing machine with adjustable working hours,working time Visual, curing efficiency higher characteristic.
2.This light-curing machine equipped with charging status recognized by charging stands(charging: the indicator light; charging end: led BAA, left: LED shinng host).
3.This light-curing machine at work,every 5 seconds buzzer "di"tone, while at the same time shows the time remaining on the display;non-work time,120 seconds without any key is pressed, the light-curing machine automatically shut down to conserve battery power;shutdown state,press any key to boot.
FUNCTION KEYS
ON/OFF button: 1.Turn on or turn off the LED blue-ray output 2.Can make the machine run
TIME button: 1.you can set the woking time (10s,20s,30s,40s)
2. Can make the machine run II Technical
Parameter:
Charger input:110V~240VAC 50~60Hz
The charger output:DC4.2V 1000mA
Lithium battery voltage:DC4.2V
Lithium battery capacity:2000mAh
Output optical wavelength:420~480nm
Output light intensity:1400mw/cm²