API Series Cjy6 Cyj10 Cjy 12 Double -Horsehead Oil Well Pumping Unit

Product Description

API series CJY6 CYJ10 CJY 12 Double -Horsehead oil well Pumping Unit
Double -Horsehead Pumping unit
Product Description API series CJY6 CYJ10 CJY 12 Double -Horsehead oil well Pumping Unit
Product Features:
Double horsehead pumping unit is a kind of energy-saving product with long stroke and low stroke frequency. It is suitable for the recovery of moderate and low viscosity oil and high water-cut crude oil. The product accords with Chinese petroleum industry standard GB/T29021-2012 and other related standards.
API series CJY6 CYJ10 CJY 12 Double -Horsehead oil well Pumping Unit
Performance and advantage
1 It adopts reducing arc-shaped back walking beam and flexible connection between walking beam and equalizer. Advantages of conventional pumping unit are retained.
2 Long stroke length, small dynamic load, little torque fluctuation, high efficiency, low energy consumption, smooth work and easy to start.
3 The stroke length is increased by 70% around, energy consumption reduced by 20~30% and power reduced by 50%, compared with conventional pumping unit of the same model.
Product Parameters
Product Specification

Model	Rated Polished Rod Capacity (lbs)	Stroke (in)	Rated Torque of reducer (lbs.in)
C-912D-470-240	47,000	240,211,181	912,000
C-912D-427-216	42,700	216,185,155	912,000
C-912D-427-192	42,700	192,165,138	912,000
C-912D-305-192	30,500	192,165,138	912,000
C-912D-365-168	36,500	168,144,120	912,000
C-912D-305-168	30,500	168,144,120	912,000
C-912D-427-144	42,700	144,120,100	912,000
C-640D-305-192	30,500	192,165,138	640,000
C-640D-305-168	30,500	168,144,121	640,000
C-640D-365-144	36,500	144,120,100	640,000
C-640D-305-144	30,500	144,120,100	640,000
C-640D-256-144	25,600	144,120,100	640,000
C-640D-305-120	30,500	120,102,85	640,000
C-456D-305-168	30,500	168,144,121	57,000
C-456D-305-144	30,500	144,120,100	40,000
C-456D-256-144	25,600	144,120,100	57,000
C-456D-365-120	36,500	120,102,85	40,000
C-456D-305-120	30,500	120,102,85	25,000
C-456D-256-120	25,600	120,102,85	25,000
C-320D-256-144	25,600	144,120,100	320,000
C-320D-256-120	25,600	120,100,85	320,000
C-320D-213-120	21,300	120,100,85	320,000
C-320D-305-100	30,500	100,85,70	320,000
C-320D-256-100	25,600	100,85,70	320,000
C-320D-213-86	21,300	86,74,62	320,000
C-228D-213-120	21,300	120,100,85	228,000
C-228D-173-100	17,300	100,86,72	228,000
C-228D-246-86	24,600	86,74,61	228,000
C-228D-213-86	21,300	86,74,61	228,000
C-228D-200-74	20,000	74,64,54	228,000
C-228D-173-74	17,300	74,64,54	228,000
C-160D-173-86	17,300	86,74,62	160,000
C-160D-200-74	20,000	74,64,54	160,000
C-160D-173-74	17,300	74,64,54	160,000
C-160D-143-74	14,300	74,64,54	160,000
C-160D-173-64	17,300	64,54,44	160,000
C-114D-119-86	11,900	86,72,59	114,000
C-114D-143-74	14,300	74,62,51	114,000
C-114D-173-64	17,300	64,54,44	114,000
C-114D-143-64	14,300	64,52,40	114,000
C-114D-133-54	13,300	54,45,36	114,000
C-80D-119-64	11,900	64,53,42	80,000
C-80D-133-54	13,300	54,45,36	80,000
C-80D-119-54	11,900	54,45,36	80,000
C-80D-133-48	13,300	48,40,32	80,000
C-80D-109-48	10,900	48,37,25	80,000
C-57D-76-54	7,600	54,41,28	57,000
C-57D-109-48	10,900	48,37,25	57,000
C-57D-95-48	9,500	48,37,25	57,000
C-57D-89-42	8,900	42,33,23	57,000
C-57D-76-42	7,600	42,33,23	57,000
C-40D-76-48	7,600	48,37,25	40,000
C-40D-89-42	8,900	42,33,23	40,000
C-40D-76-42	7,600	42,33,23	40,000
C-40D-89-36	8,900	36,28,20	40,000
C-25D-67-36	6,700	36,28,20	25,000
C-25D-56-36	5,600	36,28,20	25,000
C-25D-53-30	5,300	30,20	25,000

API C Series Pump Jack Effect Diagram API C Series Pump Jack Drawing
Detailed Photos
SEACO Oilfield Equip,is manufacturer & stockist of equipments,services and solutions to the upstream to downstream in oil & gas industry.We are aimed at helping customers to obtain the maximum from their each well.Providing our customers superior quality at the best value for products and services in order to ensure our customers' continued satisfaction.

Our main range include but not limited below:

1).Rig packages: 250hp to 3000hp Land drilling rigs; Workover rigs(Fast-moving rigs are available).

2).Rig components: Crown block;Travelling block; Hook; Swivel; Rotary table; Drawwork; Driller's cabin; MCC/SCR house; MCC/VD house; Top drive ect...

3).Wellhead & Pressure control equipments: BOP; Chock & Kill manifold; Pressure hoses; BOP closing unit; Casing&Tubing head; X-Mas tree; Valves; Spools and flanges ect...

4).Solid control & Mud system equipments: Shale shaker; Desander; Desilter; Mud cleaner; Hopper; Centrifuge; Agitator; Mud tanks; Unions,ect...

5).Tubulars & Drilling strings: Drill pipe; HWDP; Drill collar; Kelly; Casing; Tubing; Pup joint; Sucker rod; Line pipes ect...

6).Tubular Running and handing tools: Elevator; Slip; Manual/Power tong; HPU; Bushing; Spinner; Bit breaker; Spider; Links; Stuibing guide; Thread protector ect...

7).Downhole/Fishing tools: Drilling & Fishing jar; Stabilizers; Hole opener; Overshot; Drilling bit ect...

8).Cement tools: Cement unit;Float collar; Float shoe;Liner hanger;Cement head ect...

9).Others: Air winch; Drilling line; Safety equipments; Mud pump spare parts; Rig parts; Fittings ect...

10). Commissioning and other services.

FAQ

Q: How can I place order?

A:You can contact us by email about your order details, or place order on line

Q: How can l pay you?

A:After you confrm our Pl, we will request you to pay.T/T (HSBC bank) and Paypal, Western Union are the most usual ways we are using

Q: What's the order procedure?

A: First we discuss order details, production details by email or TM. Then we issue you an Pl for your confirmation.You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been fnished,we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.

Q:How do you take care when your clients received defective products?

A:replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.

Q: How do you check all the goods in the production line?

A:We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.