Battery Operated Standalone Smoke Detectors Smoke Alarm for Home Security System

Product Description

Introduction
Standalone photoelectric smoke alarm is common used for the home, factory, warehouses, hotel and other places of fire warning. This alarm has the characteristics of high sensitivity, stability and reliability, small power consumption and durability, easy to use and can be used with the security system.
Parameters

Product Name	Standalone smoke detector	Work Voltage	DC3V(2*1.5V)
Volume	≥80db	Battery	950mah/1.5V*2
Battery life time	1 and half year	Work temperature	-10°C~+50°C
Output	Sound and light	Humidity	≤95%.
Product standard	GB20517-2006,CE	Dimension	110mm*50mm, around 150g(with battery)

Installation
1. Fix the detector chasis on the ceiling with screw.
2. Open the detectors upper case, assemble the battery and fix the detector on the chasis.
2. Press test button to perform self-test to make sure it work well.
3. Smoke detector inspection: perform usual inspection to make sure it work well. normally,
the indicator light will blink every 2 seconds. When the smoke density exceed the standard, it will send out firm alarm.
4. Battery inspection: if the battery voltage is too low, it will sound lightly every 1 minute till
the battery run out of energy.
Product Range
Addressable fire alarm system
Wireless alarm system
Electrical fire monitor system
Extinguishing control system
Fire door monitor system
Standalone smoke detectors and combustible gas detector
4-wire smoke detectors with relay output.
Service
1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.