CNMI Epoxy Resin and Hardener Resin Epoxy Kit FL210 2:1 Clear AB Glue Apoxy Resin Floor for 3D Floor Paint Scratch Resist

Product Description

Product Description
CNMI Epoxy Resin and Hardener Resin Epoxy Kit FL210 2:1 Clear AB Glue Apoxy Resin Floor for 3D Floor Paint Scratch Resist
CNMI Industrial Epoxy Resin AB Glue FL System is a two-component epoxy floor coating system which is VOC-free, 100%solids and odor free. More, we add Macromolecule antioxidant to keep it not changed yellow over time. Excellent UV Protection, Scratch Resist and a long pot life and working time. CNMI FL System designed as a top coat epoxy but it is self-priming. We have 3 type for 3D Floor, Metallic Epoxy Floors, Concrete Floors.

Information	CNMI Industrial Epoxy resin FL210 is a kind of epoxy resin cured at room temperature and low temperature. It has low calorific value, good smoothness, natural defoaming, low viscosity, high strength and high hardness. It can be cured at room temperature or heating.
Specification (1)	Epoxy Resin	FL210-A	Standard
	Appearance	Colorless Transparent Liquid	-------
	Viscosity (mPa.s 25ºC)	1000-2000	GB/T 22314-2008
	Epoxy equivalent (g/eq)	195-210	GB/T 4612-2008
	Hardener	FL210-B	Standard
	Appearance	Colorless Transparent Liquid	--------
	Viscosity (mPa.s 25ºC)	100-200	GB/T 22314-2008
Note:(1)Typical performance should not be considered as product specifications

Mixing and Processing	The resin system shall be mixed in the following proportions
		FL210-A	FL210-B
	Mass Ratio	100	50
Mix Viscosity (mPa.s 25ºC)	1000-1500
Processing time 25ºC	50-80min
Cure Condition	25ºC/12-48hours/ 60ºC 2-4hours

Detailed Photos
Certifications

Company Profile
Our Advantages
FAQ Q1. Will the Apoxy Resin Floor Coating turn yellow over time?
A: No, because we add HALS, which is UV protection, it won't change yellow.
Q2. Does this Apoxy Resin Floor Coating tend to scratch over time?
A: Our product is Scratch Resistance, Heat Resistance, Electrical resistance.
Q3. What is the ideal temperature to make mixtures?
A: The optimal temperature is 25 degrees celsius, because our laboratory temperature is 25 degrees celsius, but a little hotter or colder is also ok.
Q4. How long can last if it is not mixed?
A: The shelf life is about 12 months, if you keep it well.
Q5. What payment terms do you accept?
A: Payment for TT, LC at sight. If you have good Credit or we cooperate long time, the OA, DP, CAD also workable.
Q6. Could you accept OEM for Apoxy Resin Floor Coating?
A: Yes, we can do the packing according to your demand, the packing bag and the label all can do your brand.
Q7: What tool or other material do I need for Apoxy Resin Floor Coating?
A: You need a weighing machine and a container to hole the resin. If do river table or art crafts you may need some pigments and accessories.

Contact Us