Heavy Duty Polyester Webbing Slings Endless Web Sling for Port Loading

Product Description

Heavy Duty Polyester Webbing Slings Endless Web Sling For Port Loading Product Introduction
Webbing sling are available in a range of materials and sizes in single leg and endless sling forms. Select the sling to be used and plan the lift taking the following into account: Material - polyester identified by a blue label is resistant to moderate strength acids but is damaged by alkalis; polyamide (Nylon) identified by a green label is virtually immune to alkalis but is damaged by acids; and polypropylene identified by a brown label is little affected by acids or alkalis but is damaged by some solvents, tars and paints and therefore, suitable for appliances where the highest resistance to chemicals other then solvents is required.
Capacity - the sling must be both long enough and strong enough for the load and the slinging method.
Apply the mode factor for the slinging method. For use at temperatures exceeding 80°C or below 0°C refer to the suppliers instructions. For flat woven slings made to BS EN 1492-1:2000 + A1: 2008.
Webbing sling product parameter as belows:

Product Type	polyester flat webbing sling / lifting belt / belt type sling
Material	100% high tenacity polyester
Width	25mm-300mm
Length	from 1m to 20m up, can be customized as require
W.L.L.	From 1Ton to 12 Ton or up
Safety Factor	4:1,5:1,6:1,7:1,8:1 (AS 1353.1) all available
Layer	Single ply, double ply, three ply and four ply
Color	According to EN standard or as required
Standard	According to Machinery Directive 2006/42/EC and EN1492-1:2008+A1
Elongation	<=7%
Lifting Eye types	1.Flat Eye 2.Reversed Eye 3.Folded Eye 1/2 Width from 1 Side 4.Folded Eye 1/2 width from 2 sides 5.Folded Eye 1/3 width
Remark	all above 5 lifting eye types are available.
Certificate	CE, ISO9001:2008, etc.
MOQ	1 pieces
Payment	T/T,L/C,D/P, Western Union, Paypal

Ranges vary in a chemical environment, in which case the advice of the manufacturer or supplier should be sought.. If the slings are used in multi-leg arrangement the angle formed between the legs should not be less than 30° or greater than 90°. If abrasion, heat generated by friction or cutting from edges or corners are likely select a sling fitted with protective sleeves and/or use suitable packing. Slings with grade 8 fittings and multi-leg slings with grade 8 master links should not be used in acidic conditions.
The unique advantages of webbing sling:
1. Especially suitable for loading round object.
2. The surface of round sling is smooth, does not cause damages to tender objects loaded.
3. Various loading methods, including dragging or pulling loaded object.
4. Various loading methods and load is bear evenlyenable the sling's usage life last longer.
5. High strength/weight ratio.
6. Anti-abrasion and anti-incision protection sleeve can be attached.
7. Has special lable, working load is differentiated by colors according to international standard. 8. Light and soft, can be used in small narrow space.
9. Non-electric conductive, no danger od eletric stroke.
10. Customized producing: we professionally make products according to your special requirements
For more any questions about the webbling sling welcome to send us email or add our wechat or whatsapp!
We are looking forward to doing buess with you!