High Performance Long Durability Waterproofing and Anti-Corrosion Pure Polyurea

Product Description

JHSW8601 high performance long durability waterproofing and anti-corrosion pure polyurea is the state of the art 100% solids, ultra fast cure, flexible, two component aromatic pure polyurea elastomer. The system consists of A component, a quasi-prepolymer rich of free NCO, and B component, a mixture of polyetheramines, amine extenders and other additives. JHSW8601 has great physical property and durability, It can be used for waterproofing and anti-corrosion.
Advantages: Curing fast, no sagging on vertical surface Excellent Physical Properties, high tensile strentgh and elongation at break Good adhension to various kinds of substrates Ambient insensitive, good thermal stability 100% Solids, No VOC's, Odorless,non-toxic Good resistance to a wide range of chemical attack Excellent Skidding Resistant, Anti-corrosion and Waterproof Properties Seamless, flexible, slick and non-porous Recommended Uses:
JHSW8601 high performance long durability waterproofing and anti-corrosion pure polyurea is an ultra fast cure system; it can be applied at thicknesses of several ten millimeters, or greater, in a single application. It can be widely used in: Metal, concrete, wood, and foam roofing Underground engineering Buried earthen containment lining (with or without geotextiles) New or existing sub-grade slabs, walls, etc. Water & wastewater lining Properties:

Tensile Strength /MPa	≥20	Solids Content/%	100
Elongation/%	≥450	VOC	0
Tear Strength/( N/mm)	≥75	Gel Time/s	8-12
Shore Hardness	≥90A	Tack Free/ s	20~30
Adhesion /(Pull off, concrete,MPa)	≥2.5	Shelf Life	12 months, unopened at 0~40 ºC
Density/( g/cm3)	0.95~1.05	Flash Point/ ºC	>100
Abrasion Resistance /(GB/T 1689-1998, cm3/1.61km, g)	≤0.04	Mix Ratio V/V	1: 1
Impermeability(0.3MPa/30min)	Impervious	Recommended Spreading Thickness/mm	2~3
Chemical Resistance	No corrosion, No Blister, No Spalling	Colors:	Optional