HIMA F8627X

Product Details

Product Description

Product Description
Brand: HIMA
Type:F8627X
Origin: the United States
Warranty: 365 days
Colour: new/used
Shipping method: Courier delivery
Module of PLC, DCS, ESD system card, the card is a vibration monitoring system, steam turbine control system module, the advantages of the gas generator spare parts brand: Allen Bradley, BentlyNevada, ABB, Emerson Ovation, Honeywell DCS, Rockwell ICS Triplex, FOXBORO, Schneider PLC, GE Fanuc, Motorola, HIMA, TRICONEX, Prosoft etc. Various kinds of imported industrial parts of our products are widely used in metallurgy, petroleum, glass, aluminum manufacturing, petrochemical industry, coal mine, papermaking, printing, textile printing and dyeing, mechanical, electronic manufacturing, automobile manufacturing, plastic machinery, electric power, water conservancy, water treatment/environmental protection, boiler heating, energy, power transmission and distribution and so on.
Emerson’s Dual-Channel Shaft-Vibration Monitor is designed for small and low channel applications such as small steam, gas, and hydro turbines, and such as compressors, pumps, and fans to measure relative shaft vibration signals. Measurement settings, alarms, and provided outputs are field configurable via software. Measurement Performance Sensor Input Type Eddy- Current Sensors Measurement Range: Sensor PR6422 0 to 250 µm Sensor PR6423 0 to 500 µm Sensor PR6424 0 to 1000 µm Sensor PR6425 0 to 1000 µm Frequency Range: High-Pass Filter 1 / 5 / 10 Hz Low-Pass Filter 50 to 1500 Hz Connection Type: Internal Converter “LEMO” socket External Converter “Harting” socket Environmental Shock Limit 20 g pk Temperature Range -20 to 65°C (-4 to149°F) Sealing IP65 Agency Ratings CE Mechanical Case Material / Weight Aluminum, stainless / ~1300 g (45.8 oz.) Mounting Wall mount Electrical Supply Voltage Nominal +24 VDC Permissible Voltage Range +18 to +31.2 VDC Power Consumption max. 6 W Buffered Out: Connection BNC and/or Pins (Cage Terminal) (2x) Voltage Range 2.0 to 10.0 VDC Accuracy ± 2.5%
The MMS 3120/.. Dual Channel Bearing Vibration Transmitter converts the signals of vibration transducers into two independent signals proportional to the vibration velocity or the vibration amplitude (peak – peak) or to an output signal proportional to the maximum of these characteristical values. The integrated module and sensor supervision detects fault functions of both - sensor and module electronic. In error situations the status of the "OK" output changes and the 4...20 mA current output indicates 0 mA. All required configurations are made by means of the MMS 3910W configuration software. The transmitters are delivered with a standard configuration suitable for most applications, if desired any other configuration can be prepared in the factory.
Limit value- and channel supervision: The transmitter provides altogether 5 function outputs. Limit values can be programmed either on individual measurements or for the sum value of the combined measurements. Beyond this, the function outputs can be used to indicate the Channel Clear state. The function outputs can be freely assigned by means of the configuration software. The following options are possible: • Without function outputs • 5 X opto-coupler output UMAX: 48 V DC IMAX: 100 mA PMAX : 5 W • 5 x relay contact (make contact) UMAX: 48 V DC IMAX: 1 A PMAX : 50 W • 5 x photomos relays UMAX: 48 V DC IMAX: 500 mA PMAX : 25 W Data interfaces: Standard: • RS 232 interface for configuration of the transmitter and for displaying of the measure data. Optional: • RS485 bus with epro protocol V2.0 • PROFIBUS DP Linearity error (without sensor): 0,2% at 25°C Linearity error (with sensor):<2,2 % at 25°C Output stability over temperature: <0,08%/10 K Long-term drift: Max. 1% of f.s.d.