Professional 5 hand pieces fat freezing slimming machine for double chin removal

Product Description

Product Description
Professional 5 hand pieces fat freezing slimming machine for double chin removal

Principle of Cryolipolysis slimming machine

Cryo is a new non-invasive way to gently and effectively reduce fat in targeted areas of the body.
As triglyceride in fats will be converted into solid in particular low temperatures, it uses advanced cooling technology to selectively target fat bulges and eliminate fat cells through a gradual process that does not harm the surrounding tissues, reduce unwanted fat.
A number of methods have been attempted for lipolysis including the use of laser, ultrasound, and radiofrequency electric current, since cryo was developed appling cooling to tissue, was approved as the most effective way to fat reduction.
This revolutionary new idea of dissolving fat, which is approved as an important technology progress in fat reduction since it is put into use.

Specifications
Descriptions	Vacuum Cavitation Machine Cryolipolysie Body Slimming Machine
Voltage	110V-240V, 50/60Hz
Screen	8 inch touch screen
Power consumption	≤800W
Cooling output temperature	-10~4°C
Vacuum	650mmhg
Cryo output pressure (Vacuum pressure)	0-106kpa
Cavitation Frenquency	40Khz
RF Freqnency	5Mhz
Atmospheric pressure	80KPa - 106KPa
Large Cryo Cap Size	68*100*180mm
Small Cryo Cap Size	54*80*155mm
Double chin cryo	Yes
Net weight	43KG
Packing size	580*540mm*1260mm

Preparation before using

1. Install the 4 attached caster wheels on the machine, fasten the screws.
↓
2. Install the attached on-hook on the machine, put the probes into the corresponding racks.
↓
3. Before using the cryo fat freeze slimming machine, it is required to open the inlet and overflow behind for adding distilled water or purified wate
↓
4. Connect the attached water funnel to the inlet, start adding purified water until water flows out from the overflow, and then close the inlet and ove
↓
5. Check the host power cable is connected.
↓
6. Check the key switch of machine is connected.