Top mill scale briquette press machine supplies

Product Description

Product Description
Product DescriptionTop mill scale briquette press machine suppliesMill scale briquette press machine can be used to press coal, iron powder, coke, aluminum, iron scrap, iron oxide, carbon, charcoal, slag, gypsum powder, tailings, sludge, kaolin, activated carbon,ect. Through continuous and meticulous research, our employees found that the use of wear-resistant alloy material can solve the problem that the pressure roller can not be used for a long time, and the service life of the pressure roller is increased by three to four times. Working principle of mill scale briquette press machineRaw materials are quantitatively and evenly fed though the middle material silos to the pre-pressing feeding device. Raw materials in the pre-pressing feeding device are forced to pressure in the middle of the two rollers of mineral powder briquette machine by pre-compression spiral. After pre-pressing and excluding gas, raw materials are sent to arc slot mouth of the two rollers. There are ball sockets uniformly distributed on the surfaces of the two rollers. The two rollers move together through the meshing transmission of the gear deceleration device. Then materials between the two rollers are pressed into certain shapes. After that, the two rollers separate slowly, and the shaped materials fall down from the ball sockets because of their own gravity, so as to complete the balling process.Product DetailsBriquette strength testPacking & DeliveryCaseMore briquette machine showCustomer VisitCompany Profile