PM867K01 3BSE076355R1 ABB Processor unit Kit (Ethernet control module)

Product Details

Product Description

Product Description
PM867K01 3BSE076355R1 ABB Processor unit Kit (Ethernet control module)
PM867K01 3BSE076355R1 ABB Processor unit Kit (Ethernet control module)
Our Email: 2235954483@qq.com
contact number:13313705507
contacts：HE
• The controller must not be exposed to conditions that exceed the values
given in the relevant technical specifications.
• The controller must not be used in an environment exposed to strong
electrical interference. Electrical machines can produce interference that
exceeds levels permitted for the equipment, for example during repair work.
• All products must be handled with appropriate precautions with regard to
electrostatic damage.
• The controller must not be exposed to direct sunlight.
Important Software Check
• Use the system’s fault-monitoring facilities to prevent accidents or mishaps.
• When in doubt, ALWAYS CHECK before executing changes.
Important Hardware Notice
• DO NOT, under any circumstances, disconnect the power supply to a
normally functioning system. Always use the correct system shut-down
procedure prior to disconnecting the power supply.
Signal Noise Due to Cables
Cables which may cause electrical interference (for example, power supply
cables) must not be installed adjacent to bus cables carrying fast digital signals.
Ensure that a minimum distance of 10 cm (4 in.) is provided between cables
installed inside cabinets.
Hazardous Electrical Supplies
Operational and maintenance procedures, during which personnel may come
into contact with high voltage, should only be carried out by personnel fully
trained in the maintenance of electrical equipment within those environments,
and who are fully aware of all risks involved.