Polymer melt spinning machine for lab use with the No. of Spinneret Hole optional

Product Description

Product Description
Product DescriptionAT225 Laboratory Melt Spinning Machine is a main key equipment in synthetic fiber production. This machine uses high temperature copper ring block to heat and melt the polymer sample, and extrudes the sample to be liquid trickle from a spinneret under the effect of inert gas (N2) pressure to produce the nascent fiber.SpecificationModelAT225Pressure range Max. 2MPa (can extend to 3.6Mpa)Input pressure: ≤13MPa, Output pressure: ≤1.5MPaaccuracy: ±0.01MPaTemperature range Max. 350℃Temperature accuracy ±0.5℃Heating modeThree heating sections with copper ring block to heat Mullite fiber insulation Temperature control mode Three independent temperature controlling with the accuracy of ±0.5℃Feed cylinder500ml, stainless steel, with soaking distribution deviceSpinneret plate Dia. 0.15~0.5mmL: D: 2:1~3:1 1~20 spinneret holes (please specify before order)Winding system Winding roller drive modeMotor-drivenSpeed range0~1400rpm, adjustable Winding roller diameter¢200mm, can be customized Max. Winding dia.¢320mm (including ¢200mm winding roller)Power supply AC220V, 50HzDimensions 870mm×1310mm×1860mm (D×W×H)Weights Approx. 320kgDetailed Images★ It consists of melting system, spinning system and winding system; ★ Stable inert gas pressure system (gas source should be prepared by the user himself);★ Metal protective hood with air leg;★ Colorful touch screen, real-time display of temperature and air pressure in cylinder; ★ Be able to independently set and control the temperature of each heating zone;★ Three heating zones with copper ring block to heat; ★ Insulation plate under the feed cylinder to block the spinneret hole for rapid heating;★ Max temperature up to 350℃;★ Cooling fan with adjustable speed;★ Dischargeable winding drum with adjustable rotation speed;★ Hand wheel to adjust the position of winding drum; ★ Organic glass window and illumination system, convenient to observe; ★ With illumination system★ With emergency stop and heat on/off button; Packing & DeliveryPackagingSize(cm)870mm*1310mm*1860mm (D*W*H)WeightApprox. 320kgPackaging Details1. The equipment is covered with film is protect it from water vapour during the trip. 2. The box is filled with foam to protect the equipment from impact. 3. Exported wooden box made from plywood, don't need fumigated. PaymentPayment ItemT/TEXW 30% T/T in advance, paid the balance before shipmentFOBCFR(C&F) 30% T/T in advance,paid the balance against copy of B/LCIF30% T/T in advance, paid the balance before shipmentFOBCFR(C&F) 30% T/T in advance,paid the balance against copy of B/LCIFL/CL/C amount above 50,000 usd, we can accept L/C at sightWest UnionAmount lower than 50,000usdDelivery Time7~10 days after receiving payment for one containerOur CompanyHistorySince 1982 with more than 20 years' experienceWarrantyTwo Year Warranty for whole productTrainingVideo and user manual for trainingOnsite serviceInstallation and training service is availableTesting serviceFree sample testing before order is availableLead time15 working days lead time for most productContacting Us ERIC QINWebsiteMobile Phone+86 188 5510 5986Whatsapp+86 188 5510 5986Skype eric-qlkWechat+86 188 5510 5986