100% virgin PVC fill sheet industrial 1000*1000mm / 850*1000mm Cooling Tower Fill Replacement

Product Description

Product Description
Product Description100% virgin PVC fill sheet industrial 1000*1000mm / 850*1000mm Cooling Tower Fill ReplacementCooling Tower Fill, is one of the most important components for exchange of gas and water in coolingtower. It is the major part to improve cooling tower working efficiency and make sure the economy andsafe operation. With the development of plastic industry, cross-current tower drench waste water intocorrugated fills, which has many advantages like heat dissipation, durable, good performance, smallventilation resistance... etc.Based on these easy and other advantages it is widely used in differenttypes of large, medium and small cooling towers.Quick view:Material：Thermal Formed PVCApplication: Cross Flow cooling towerSheet thickness: 0.25-0.45mmSheet spacing:16mm,18mmSheet width: 850mm,1000mmSheet length: 1000mm,or CustomizedColor: black or graySpecificationItemSP cooling tower fillWidth850mm, 1000mmLengthCustomizedThickness0.25 - 0.33mmFlute16mm/18mm1000mm Cooling Tower Fill Replacement1. Good performance, high cooling efficiency, thin film filler, protruding fine ripples make the water contact surface larger.The fillers are placed in multiple layers, and there is a redistribution process of hot water between layers.2. The fillers with good hydrophilicity, small ventilation resistance, rough surface and smoother surface have good hydrophilicity. The water absorption is less than 0.015%, which makes more water flow form film without splashing, makes water and air contact more fully and makes the surface of water and air disturb greatly when they flow.3. The heat dissipation of filler accounts for more than 85% of the total temperature drop in the cross flow tower. The cooling process of the cooling tower is mainly carried out on the surface of the cooling filler plate. The water film on the surface of the filler slowly flows down. The inner water film is the humid air with high enthalpy value of 100% humidity. The water molecules run from the area with high enthalpy value to the fresh air with low enthalpy value, making the enthalpy value of the air out of the tower increase. With the decrease of the concentration of water molecules, the water molecules in the circulating hot water evaporate from the liquid state to the gas state, thus taking away the latent heat of steam. According to the above principle, the quality of filler is the key of refrigeration effect.FAQ1. We can supply cooling tower fill sample for you.2. Loose sheet or glued block are both ok. If we ship them by loose sheet, it can save so much shipping space, by this way, It can save much cost for the freight.