25 kvar Polypropylene Film Power Saver Capacitor for Electrical Motor

Product Description

General Decription:
Our self-healing type low voltage shunt capacitor, applied the advanced Zn-Al complexes metallized film, adopted foreign advanced production technology techniques and international IEC60831-1(1996) standards. The products is mainly suitable for low voltage electric network to improve power factor, reduce reactive loss and improve the voltage quality.
Featurns:
1- Small volume, light weight: it is only 1/4 and 1-5 of the weight and volume of the outdated products respectively
2- Low loss: with the actual lossless than 0.1, little radiation, low temperature rise and good energy conservation effect
3- Excellent self-healing performance: when a part of the isolation is fed through due to the over voltage, it is capable of self-healing so as to continue the operation, the reliability is improved greatly
4- Safety: Equipped with self-discharging resistant and safety devices inside, the inner discharging resistant can make the attached electric discharged; when there is wrong with the capacitor, the fuse equipment can cut out the electric power so that no more trouble with the capacitor, safety and reliable.
5- Without oil leakage: this product adopted advanced half-solid soak material drop melting point higher than 70 degree, avoid leakage during operation and protect the envirament the capacitor will not no use since the leakage.
Technical Parameter:

Rated voltage	250-690VAC
Rated capacitance	1-100KVAR
capacitance tolerance	-5 - +10%
Tangent of the los angle	≤0.15%
With stand voltage of case between phase	2.15Un.2s
With stand voltage of case between phase	3KV(AC)10s&3.6KV(AC)2s
Insulation	500VDC among the phases 1 min more than 100mΩ
Max allowable voltage	Rated voltage 110%
Max allowable current	Rated voltage 130%
Self-dischargeing characteristic	switch off the power supply for 3 min, the residual voltage less than 50V

Model and dimension: