New 2023 Automatic Digital Multi-Function Anti Bedsore Alternating Pressure Air Mattress with Device

Product Description

New 2023 automatic digital multi-function anti bedsore alternating pressure air mattress with device

Alternating Pressure Mattress Product Description:
1.Medical Air Cushion is Made of rubber coated nylon cloth.
2. Consists of air pump and air cushion.
3 .Keep the skin dry and prevent breeding of pus cell.
4. Prevention and cure the bedsore of bedfast patient.
5. Clean and convenient, safe and durable features etc.
6. Has such characteristics as high strength,light and slinky.
7. High efficiency, low energy consumption, low noise and long-term operation stability.
8. Through micropore on surface of air cushion, slight air blowing out to cool the body of patient.
9.Suitable for the patient lying in bed for a long time or the paralytic patient to avoid the bedsore.
Specifications of Alternating Pressure Mattress:
1.The gentle fluctuation resulted from alternating air supply.
2.Air pipeline of pump supplies air every 5 minutes.
Attention:
1.The pressure of outside can't be over than 100kg.
2.Don't touch it with sharp things to avoid leaking air and affect use.
3.The air cushion can only used for the patient, and can't be used under the water.
4..Keep it away from acid, alkali,organic solvent or heat source avoiding direct sunshine.
5.Clean with cloth soaked with a little washing powder ,wipe it slightly.Avoid chemical solvent .

General:
• For patients who are likely to spend more than15 hours per day in bed.
• For patients who are classed as medium to high risk of developing pressure ulcers.

Alternating Pressure Mattress Specification:

Alternating Pressure Mattress
Pump	Pad/ mattress
Item: VU602	Item: VU6007
Power supply: AC 110V/220V; 50~60Hz	Size: 200cm (L)*90cm(W)
Air output:: 6-8 liter/min	22 pcs inflatable air tubulars
Pressure range: 20mmHg-110mmHg	Top cover: Nylon PU/ strength
Power consumption: 20W;	Air cells: Nylon/ PVC/ TPU
Fuse: 1A	Bottom: tarpaulin/ nylon PU
Size: 30cm(L) x 24cm(W) x 13cm(H)	Mattress weight: 6kg
Weight: 2kg	Weight Capacity: ≤135kg
Certification: CE, FDA, ISO13485

Alternating inflation and deflation circularly, compression and decompression of air waves help patients to change body position, increasing the blood circulation, anti bedsore and prevent decubitus.


Alternating Pressure Mattress Details:
1. high-end pump (compressor), large display LED touch keypad control,
- Turn over at regular intervals: turn over one time each hour
- Three kinds of wave circulation time: 9 minutes, 12 minutes, 25 minutes
- 45° sit up


2. Medical Air Mattress use Medical grade fabric material, high strength, durable, breathable and skin-friendly. Detachable tubular cells design is used flexibly.


3. Medical Air Mattress Quick main connector to machine


4. Medical Air Mattress Considerate Design for patient



Alternating Pressure Mattress Installation/ Use
1. Unroll the mattress.
2. Position it on the bed.
3. Secure it to the bed with the fixing straps.
4. Put the compressor (pump) on flat.
5. Connect the mattress feed pipes to the compressor (pump) connector by matching the appropriate outlets.
6. Connect the electrical power supply cable to the compressor (pump).
7. Guide it along the bed to the mattress plug socket and plug.
8. Press switch to turn on the compressor (pump).
9. Before positioning the patient onto the mattress, wait until the mattress has been fully inflated.
10. Select the pressure corresponding the patient's morphology.

Alternating Pressure Mattress Certificate
Our factory: