Mr-J3-70A AC Motion Servo USB Flash Drive

Product Description

AC motion servo drive / amplifier with built-in dynamic brake + built-in position function - Mitsubishi Electric (MELSERVO J2S series) - Rated output 400W / 0.4kW - Supply voltage 200Vac-230Vac (200V class; 220Vac / 230Vac) (Single-phase input (2P) or 3-phase input (3P)) - with CC-Link communication capability - rated for 0...+55°C ambient.
The Mitsubishi MR-J2-200CT weighs 4.4 kilograms and works on a three-phase voltage supply of 200 to 230 VAC. The frequency of the incoming voltage supply must be 50 to 60 Hz. The speed frequency response of this model is 250 Hz, and it is controlled via a sine-wave PWM signal.
MR-J3-70A( MRJ370A) manufactured by MITSUBISHI, also called AC motion servo drive/amplifier with built-in dynamic brake, MELSERVO J3 series, Melservo MR-J3 series, AC servo driver. general-purpose interface, compatiable with HF-KP73, HF-MP73 servo motor. Rated output 750W / 0.75kW - Rated current 5.8A, supply voltage 200Vac-230Vac (200V class; 220Vac / 230Vac), single-phase or 3-phase input, sine-wave PWM control.

Item	Data
Country/Region of	Japan
Product Name	AC servo drive
Product series	MELSERVO J3 series, MR-J3 series
Output Rated voltage	3-phase 170VAC
Output Rated current	5.8A
Main circuit power supply Voltage/frequency	3-phase 200 to 230VAC 50/60Hz or 1-phase 200 to 230VAC 50/60Hz
Rated active power (kW)	750W / 0.75kW
Compatibile servo motor	HF-KP series, HF-MP series, HF-JP series HC-UP series
Control system	Sine-wave PWM control/current control system
Dynamic brake	Built-in
Positioning feedback pulse	Encoder resolution: 262144 p/rev
Structure (IP rating)	Fan cooling open (IP00)
Dimensions	H168mm x W60mm x D185m