Thin Sheet Metal Plate High-Precision and Precision Guillotine Pneumatic Mechanical Shear Machine

Product Description

Feature for mechanical shearing machine: This versatile shearing machine is built for straight-line shearing of thin plates and perfectly suits applications in machinery, electrical appliances, hardware, automotive, stainless steel decor, and more. It's ready to tackle harsh conditions with the following key specs:
Power Meets Precision: Ideal for sheets with a tensile strength limit of up to 450 N/mm². Precision Thickness Range: It works best on sheets between 0.6 and 3 mm thick and easily handles a wide variety of materials. Controlled Temperature for Quality Cuts: For optimal performance, the sheet temperature should stay below 50°C. Adjustable Shear Thickness: When dealing with sheets of higher tensile strength, simply reduce the shear thickness for seamless results. Efficient Intermittent Shearing at Full Load: Running at total capacity? This machine shines with intermittent shearing for consistent, reliable performance.
Feature for reducer direct drive model shearing machine:
1. The machine adopts a single-sided open transmission, which is compact in structure, safe, reliable, and beautiful.
2. The machine's upper tool rest is welded from steel plates, which are highly strong, lightweight, and accurate in shearing.
3. The pressing force of the pressing device is large and uniform. It adopts metal pressing claws, which are low-noise and will not crush the workpiece. At the same time, the pressing force also acts as a balancing force to make the machine run smoothly.
4. The machine is equipped with front and rear stoppers, making it easy to use.
Application Scenarios and Purpose of Use for Reducer Drive Shearing Machine
This machine suits straight-line shearing of thin plates in machinery, electrical appliances, hardware, automobiles, stainless steel decoration, and other industries. The machine is ideal for the following working conditions:
1. The tensile strength limit of sheared sheets is≤450N/mm² 2. The thickness of the sheet is 0.6~3mm
3. The temperature of the sheet should not be greater than 50ºC
4. When the tensile strength of the sheared sheet is high, its shear thickness should be considerably reduced
5. At full load, only intermittent shearing is possible
This machine suits straight-line shearing of thin plates in machinery, electrical appliances, hardware, automobiles, stainless steel decoration, and other industries. The machine is ideal for the following working conditions:
1. The tensile strength limit of sheared sheets is≤450N/mm² 2. The thickness of the sheet is 0.6~3mm
3. The temperature of the sheet should not be greater than 50ºC
4. When the tensile strength of the sheared sheet is high, its shear thickness should be considerably reduced
5. At full load, only intermittent shearing is possible