High Performance Low Noise HD Universal Ku Band Single LNB

Product Description

LNB Specifications

Input Frequency	1).Low Band:10.70 GHz -11.70GHz
	2).High Band:11.70 GHz -12.75GHz
Output Frequency	1).Low Band:950-1950MHz
	2).High Band:1100-2150MHz
L.O. Frequency	1).Low Band:9.75GHz(1MHz@25ºC)
	2).High Band:10.6 GHz(1MHz@25ºC)
L.O. Stability	1).Low Band:±1MHz(-40ºCto+70ºC)
	2).High Band: ±1MHz(-40ºCto+70ºC)
R e flector Type	Offset
Noise Figure	0.3 dB
Conversion Gain	≥65dB
Gain Flatness	≤+/-2dB
Intput VSWR	2.5:1(max)
Output VSWR	2.0:1(max)
Output Connector	F-female Connector
Output Impedance	75Ω
Feedhorn Mounting	40mm
Cross Polar Isolation	20dB(min)
Supply Voltage	1)Ca:11.5-14.0v(Vertical Polarization) 13VDCType
	2)Cb:16.0-19.0v(Horizontal Polarization)18VDCType
Direct Current	150mA
Control Signals	1).Low Band:Ca or Cb(see below)
	2).High Band:Cc or Cb(see below) 3)Cc:continues 22KHz
Operating Temperature	-40ºCto+70ºC
Storage Temperature	-40ºCto+80ºC
Relative Humidity	0%-95%
Phase Noise	1)-50dBc/Hz@1kHz(max)
	2) -75dBc/Hz@10kHz(max)
	3) -95dBc/Hz@100kHz(max)
Packing and weight	38*34*35cm / 100pcs / 11KG

Satellite television is a miracle of modern technology, delivering clear, crisp picture and sound from satellites thousands of miles away, captured by a relatively small satellite dish. The electronics that make this possible are designed to be weatherproof to withstand the test of time, although they do sometimes need replacing. Other times, you may want to upgrade your dish's capabilities, and occasionally that can be done without replacing the entire dish. All you need to do is replace the LNB.
What is an LNB?Most of a satellite dish is just plain metal. The only part that contains any electronic components at all is in the front of the metal arm. It's generally referred to as an LNB or sometimes LNBF, which stands for Low-Noise Block downconverter. (Depending on your satellite TV system, it can also perform other tasks, too.)
An LNB has two important functions: it's a low-noise amplifier, meaning that it takes the extremely weak satellite signal and amplifies it. It's also a block downconverter, meaning it takes the signals on the super-high satellite frequencies and converts them to lower frequencies. Both functions are important in order to deliver a satellite signal through a regular cable.
Satellite signals are very weak by the time they travel over 22,000 miles to your dish. The big, round, "dish" part of your dish acts as a lens, focusing as much signal as possible onto the LNB. The LNB amplifies that signal and sends it down the cable. There are other functions, too, but they're not as important as receiving the signal.
What's the Difference Between an LNB and a LNBF?First of all, let's explain the terminology:
LNB = Low Noise Block down-converter
LNBF = Low Noise Block down-converter plus Feedhorn
A Feedhorn is basically a metal funnel that guides the incoming signal to the actual antenna stub inside the throat of the LNB.
LNB's and LNBF's are both amplifiers used in satellite dishes. As with other signal amplifiers, they take the very faint signal they receive and magnify it so that it is powerful enough to use. This is the first step in taking the microwave signal coming from space and turning it into images and sounds for televisions and computers.
DESIGN
A simple LNB attaches to the feedhorn of a satellite dish. An LNBF is a more highly developed piece of technology, being a part of the feedhorn itself. For this reason, an LNBF can be smaller than an LNB with comparable capabilities.
FUNCTION
As you switch channels, the LNB switches polarity through the use of an exterior motor. With an LNBF, the polarity changes when the receiver changes the voltage going into it. This voltage shift causes it to switch back and forth between two different antenna probes (horizontal and vertical) within the LNBF itself.
USE
Larger, older satellite dishes generally use the older LNB's that are separate from the feedhorn. Smaller, newer satellite dishes generally use the more compact LNBF's. Because the industry has shifted almost completely to the use of LNBF's, many actually do not even make the "F" distinction anymore, as LNBF's are completely replacing LNB's anyway.
Company Profile
Nanjing Shinewave Technology Co., Ltd. is a company specializing in the research and development, production and sales of RF microwave antennas, active and passive components and subsystems. The company's product field covers a variety of microwave communication devices, including anti-jamming antennas, RF power amplifiers, T/R modules, VCO/DROs, microwave filters, duplexers, frequency sources, and related subsystems, which are widely used in mobile communications, radar, and other fields.
In order to meet the special needs and higher requirements of customers, in addition to standard products, we provide customized product development methods. We always provide the customers with fast and high-quality products and services.Showroom
Participation in exhibitions
Why choose us
Staffing
Over ten years' OEM/ODM experience.
R&D team with doctor,master degree talents.
Products covers a wide range of applications.
TECHNICAL SUPPORT
Fast Response
Provide Project Technical AdviceTo Provide Customers With Quality Pre-Sales/Post-Sales Service
PRODUCT SUPPLY
Full Spectrum Products Available
Customer Needs As A Guide
To Provide Customers With Customized Products And Solutions
PRODUCT QUALITY
All Have Passed Various Performance Tests Before DeliveryTo Ensure That The Product is Good And Stable During Use Certifications
FAQ
1. Our Advantages
Relying on the academic research team of famous universities, the company has established an innovative research and development team with doctoral and master's degree talents, and continues to absorb excellent talents in the industry and outstanding students from famous universities to strengthen the team.The company has about twenty authorised invention patents in microwave devices, circuits and antennas. The application field involves radar, electronic countermeasures, aerospace and aviation.
2. About Customised
We can customise according to customer's requirements, just tell us the frequency, gain, power.
3. About Delivery Time
Customised products are normally 4-6 weeks, if in stock 1-2 weeks can be shipped.
4. How quality is guaranteed
1)Quality Control: Strictly testing raw materials and the production process to meet standards.
2)Performance Testing: Conducting functionality and environmental tests to verify power output and other key metrics.
3)Warranty and Support: Providing a warranty period and technical support to address issues during use.
4)Factory Audits: Regularly conducting internal and third-party quality audits.
5. Delivery Method
If you have your own freight forwarder, we can send to your designated freight forwarder, if not, we can choose the most convenient way of delivery, such as DHL, Fedex, air freight, sea freight.
6. Payment Method
L/C,D/A ,D/P,T/T,Western union, Moneygram, Paypal, Alipay, Bank.