Hydraulic Plywood Hot Press Machine for Making Structural Plywood

Product Description

Hydraulic Plywood Hot Press Machine for making structural plywood

The utility model relates to an anti-deformation building plywood. At least two long wooden square plates are arranged on one side of the plate, and the wooden square plate is connected with the plate through a connecting piece. Because the hardness of the wood square board is higher than that of the board, the wood square board can prevent the deformation of the board and improve the service life of the plywood.
Plywood is a three-layer or multilayer plate-like material made of wood segments cut into veneer or thin wood cut by wood square planer and then glued together with adhesive. Usually, odd layers of veneer are used and the fiber directions of adjacent layers of veneer are glued together vertically.
Plywood is one of the commonly used furniture materials, as one of the three boards of the wood-based board, can also be used for aircraft, ships, trains, automobiles, buildings and packaging boxes and other materials. A group of veneers is usually formed by gluing billets perpendicular to each other in the direction of adjacent layers of wood grain. The surface plate and the inner plate are usually proportionally arranged on both sides of the central layer or the core of the board. A slab made of gelled veneers crisscrossed in the direction of wood grain, pressed under the condition of heating or not heating. The number of layers is usually odd, and a few have even numbers. The difference of physical and mechanical properties in vertical and horizontal directions is small. Common types of plywood are plywood, plywood and so on. Plywood can improve the utilization rate of wood and is one of the main ways to save wood.
The usual length and width specifications are: 1220×2440mm, and the thickness specifications are generally: 3, 5, 9, 12, 15, 18mm and so on. Main tree species: beech, camphor, willow press, poplar, eucalyptus and so on.
Hot press is one necessary machine for making kinds of plywood, like anti-slip plywood, decorative plywood, film faced plywood, flta plywood, mariine plywood, packing plywood and others.
Hot press machine connects with oil boiler or steam boiler or electricity boiler, to reach the suitable temperature and set the pressure, to press glued veneer plywood, and make the end plywood size strong and solid.

Hydraulic station, oil cylinder, hot platens, good frame, electric box and others, all hot press parts. For our hot press, we can make sure it works very well and long life span, because all its parts and accessories, are good type.

Our factory in Linyi city, Shandong province, China, we manufatcure the full sets of plywood production machines, from the materials -wood, to the end product -plywood, we can offer you all good and necessary plywood machinery. Except the hot press, like the papel peeling lathe, veneer drying machine, glue machine, core composer, cold press, plywood sizing machine, plywood sander, lift table and others.

Welcome contact us