Galvanized perforated mesh fence metal wind dust fence

Product Description

Product Description
Galvanized perforated mesh fence metal wind dust fence Product Description The windbreak wall / wind dust fence is based on the principle of aerodynamics. According to the results of the implementation of the on-site environmental wind tunnel test, it is processed into a certain geometric shape, opening ratio and different hole shape combined wind and dust suppression wall, so that the circulating air (strong wind) passes through the wall. In the body, the upper and lower disturbing airflow is formed on the inner side of the wall to achieve the outer strong wind, the inner weak wind, the outer small wind, and the inner side without the wind, thereby preventing the dust from flying. 2)Twins Peaks Wind Dust Net: Forming 900mm in width, peak of high is 50mm-100mm, Plate thickness 0.5mm-1.0mm. Length: 0-6m. We can produce according to customer's requirements. 3)Three peaks wind dust net: Forming 810mm—950mm in width, peak of high is 80mm, Plate thickness 0.5mm-1.0mm. Length: 0-6m. We can produce accordingto customer's requirements. 4)Perforated corrugated metal panels:Perforated corrugated metal mesh always show on circle hole shape, whatever one, two or three peaks wind dust net belong to perforated corrugated mesh, (the hole is circle shape). 5)Expanded corrugated metal panels: Expanded corrugated metal mesh always show on diamond hole shape, whatver one, two or three peaks wind dust net belong to expanded corrugated mesh,(the hole is diamond shape) Production Process:1 Shear bending: Shearing and bending are important aspects of production. Advanced processing equipment determines the quality of the product.2 Punching: It is the second link in the production of windproof nets. Professional production workers process high-quality punching products for you.3 Molding: The third part of the wind-proof net: wind-proof product processing and forming equipment, with continuous forming equipment of double peak and triple peak, the length of the windproof net can be 10 meters or even longer.4 Cleaning: The fourth step in the production of wind and dust suppression nets is to prepare for the electrostatic spray in the back. The cleaning effect of the cleaning directly affects the quality of the surface spray.5 Electrostatic spraying: The fifth step of the wind and dust suppression net is to spray the surface of the product to subject the product to various harsh environments without corrosion and rust. Company Information Anping Dongjie Wire Mesh Products Factory is founded in 1996 with over 5000sqm areas. We have more than 100 professional workers and 4 professional workshops: expanded metal mesh workshop, perforated workshop, stamping wire mesh products workshop ,molds made and deep-processing workshop. Certifications