Module spare parts SCM-1

Product Details

Product Description

Product Description
Focus on DCS, PLC, robot control system and large servo system.
Main products: various modules / cards, controllers, touch screens, servo drivers.
Advantages: supply of imported original products, professional production parts,
Fast delivery, accurate delivery time,
The main brands include ABB Bailey, Ge / fuanc, Foxboro, Invensys Triconex, Bently, A-B Rockwell, Emerson, ovation, Motorola, xyvom, Honeywell, Rexroth, KUKA, Ni, Deif, Yokogawa, Woodward, Ryan, Schneider, Yaskawa, Moog, prosoft and other brands

SCM-1

2 Specific safety information Five safety rules Warning! The five safety rules according the so called "VBG4 Electrical Substations and Equipment“ must be observed in all circumstances for personal safety: 1. Isolate the system before beginning work. 2. Secure against reactivation. 3. Ensure that there is no voltage. 4. Ground and short circuit. 5. Cover or shut out neighboring parts under power. Additional safety standards Warning! The following safety standards must be observed in all circumstances: 1. IEC 60255 for protection relays in high-voltage substations 2. DIN 57627 plug connections Working on and operating the device Note Only qualified personnel may work on and operate the device. Qualified personnel are: Entrusted with the setup, installation, commissioning and operation of the device and the system in which it is installed. Qualified and authorized to conduct switching operations in accordance with the standards of safety engineering. This specifically includes switching on and off, isolating, grounding and signage. Trained in safety engineering standards and are familiar with the maintenance and use of safety equipment. Trained in first aid. REF 542plus switchbay protection and control unit Manual Part 3: Installation and Commissioning 1VTA100004-en DMS,2001-10-04 REF542plus: Installation and Commissioning 12 / 80 4 Mounting and Installation In this chapter you will find information: on what to do first on delivery of the REF542plus the requirements for the installation location and the environmental conditions, how to set up the REF542plus and integrate it into the bay and how to check the wiring to run the commissioning process. 4.1 Unpacking The REF542 bay control and protection unit does not require special shipping protection. The packaging is adapted for the shipping type and destination. Please proceed as follows: Visually inspect the unit and the packaging when unpacking it. Any shipping damage found in the packaging or the unit should be reported immediately to the last shipper, who should be informed in writing of liability for the damage. Check the delivery for completeness using the order documentation. If there is anything missing or any discrepancies with the order documentation, contact the ABB sales office immediately.