Fiberglass Roving for Spray up

Product Description

Spray Up roving is produced from a collection of continuous glass filaments gathered, without mechanical twisting into a single bundle. The filaments, which make up the bundles, are bonded together with a special size. Multiple bundles are then pulled together to form a strand which is wound into a tubeless package ready for use in customer application of which are producing GRP ships, sanitary ware, storage tanks and HOBAS pipes, etc.
Products Feature and Advantages: Excellent chopped performance and dispersion.;Fast and complete wet-out; Low static, no fuzz; Easy roll-out and air release; High mechanical strength.
Packing Style: Each bobbin is 18± 1kgs and wrapped by a PVC shrink bag. If required, each bobbin could be packed into a suitable cardboard box. Each pallet contains 3 or 4 layers, and each layer contains 16 bobbins(4X4). The bobbins in the pallet could be singly piled or be connected as start to end by air spliced or by manual knots.
The whole pallets of bobbins are wrapped with cardboard boxes, packed on the pallet with packing straps and shrink film or with multi-layers of shrink film only.
Storage: This product should be stocked in dry and cool places. The best condition is with temperature between 15 and 35, with a relative humidity between 30%-70%. Please keep the product in its original packing before use, avoiding moisture.

Product Code	Linear Density tex	Linear Density yield	Application Features	Finished Products
HYXT132BS	2400, 3100	207,160	General Purpose	Sanitary Ware, Yacht, Truck Components
HYXT132N	2400	207	Good Anti-slip on large vertical surface	Swimming Pool, Large Boat Hull
HYXT132D	2400	207	Easy Roll-out, Good conformity to Mould Structure	Products of Multi-angle & Complex Structure