US$47,260.00
|
1 Piece
(MOQ)
|
Basic Info.
Usage
Marine Excavator, Mining Excavator
Transmission
Hydraulic Transmission
Drive Type
Internal Combustion Drive
Bucket Capacity
0.5~1.0m³
Certification
CE, ISO9001: 2000
Transport Package
Container
Product Description
Product Description
ZG150 15 ton excavator
CHANGLIN ZG150 Equipped with top brand engine, strong power, high efficiency, energy saving, reliable and durable; advanced negative flow hydraulic system, comfortable operation, high operating efficiency, excellent cost performance; full power control, four power modes to adapt to different working conditions; stepper motor accurately controls the throttle , Significantly reduce fuel consumption; full 3D modeling and finite element analysis technology to ensure the reliability and stability of structural parts.Based on the above advanced technology, CHANGLIN ZG150 has been widely using in construction sites such as building construction, mining engineering, water conservancy project and etc.
•Equipped with Top brand engine, high load resistance, high horsepower output, high reliability, low fuel consumption, significantly reduce the use and maintenance costs •Advanced negative flow hydraulic system is adopted, which has better system stability and reliability, faster compound action speed and higher operating efficiency. •High-strength reinforced box-type side beams and X-shaped middle frames, high-reliability towline wheels and track rollers, can withstand the impact caused by excessive loads. •Intelligent electronic monitoring system, real-time monitoring, self-diagnosing fault alarm, maintenance information prompt.
ITEM | UNIT | Technical specifications |
GE150H |
Operating weight | Kg | 13890 |
Power | KW/rpm | 86/2200 |
Rated bucket capacity | | m3 | 0.6 |
Length | A | mm | 7762 |
Width(500mm track) | B | mm | 2510 |
Height | C | mm | 2983 |
Turntable width | D | mm | 2510 |
Height of cabin | E | mm | 2825 |
Ground clearance of counterweight | F | mm | 915 |
Engine cover height | G | mm | 2243 |
Min. ground clearance | H | mm | 416 |
Tail length | I | mm | 2306 |
Turning radius of turntable | I' | mm | 2387 |
Wheel base of track shoe | J | mm | 3010 |
Length of chassis | K | mm | 3751 |
Width of chassis | L | mm | 2490 |
Track shoe gauge | M | mm | 1990 |
Standard track width | N | mm | 500 |
Max. traction | | KN | 122 |
Traveling speed (H/L) | | Km/hr | 5.9/3.4 |
Swing speed | | rpm | 13 |
Gradeability | | Degree(%) | 35(70%) |
Ground pressure | | Kgf/cm2 | 0.423 |
Packaging & Shipping