2024 Newest Customized Heat-Resistant Cast Iron Slag Pot Cinder Pot Slag Ladle

Product Description

Product Description
Slag pot is an important equipment in steelmaking, which is a load device for collecting molten slag or solid slag produced in the process of steelmaking and ironmaking. This product in the casting process of continuous technological innovation, with fast delivery, long service life, durable and other advantages. Every slag tank we produce is designed and engineered to meet specific and critical custom specifications. Our specialist engineering and foundry technicians are committed to working with you to suggest improvements that will reduce costs and extend the life of the slag pot through increased efficiency.
The slag pot is an important steelmaking equipment in the metallurgical industry. It is a container used to containhigh-temperature molten slag generated in the process of steel smelting. It has a bowl-shaped container with lifting trunnions on both sides.In production practice, the use of slag pot in ferroalloy smelting mainly has the following problems:(1) Due to the design of the overflow port of the slag pot, the center of gravity of the slag pot is shifted, and the slag pot isinclined during the lifting process, and the slag liquid is easy to overflow, and there is a big hidden danger.(2) The overall structure of the slag pot is unreasonable. After the thermal stress is applied, cracks are easily generated, and the cracks will cause bag penetration.(3) It is designed to use one lined molten iron ladle and three slag ladle. Sometimes too much molten iron will overflow from the molten iron ladle into the slag pot, causing the temperature at the bottom of the slag pot to rise sharply, which will cause damage to the slag pot.Improvement measures1. Thicken the wall thickness of the slag pot inside the rear of the slag pot, so that the center of gravity can be balanced after the slag pot is lifted.2. The improvement part is the removal of the upper reinforced side of the slag pot, the bottom and middle and upper parts of the slag pot are evenly thin, the bottom reinforced side is reserved for expansion joints, and the bottom is increased with strong ribs.3. Change the structure of the tapping cart, from the original combination of three slag pot with a lined molten iron ladle to two lined molten iron ladles and two slag pot, which can effectively prevent molten iron from flowing into the slag pot, Causing local high temperature damage to the slag pot.Slag pot spraying technology.1. The implementation of slag pot spraying technology can effectively eliminate the smoke pollution of steel slag turning over the tank.2. The implementation of slag pot spraying technology can increase the removal rate of slag tanks and facilitate the turnover of slag pot.3. The implementation of slag pot spraying technology can reduce the loss of slag pot.

Our service

1.Any inquiry will be quoted within 48hours 2.Exclusive and unique solutions will be provided by our well-experienced senior consultant team 3.You can get more information about Chinese market from us 4.Timely deliver 5.Special discount and protection of sales area will be provided to our distributor Parameters

Special Features: 1. We can make big size alloy steel castings with Sodium Silicate Sand Process. 2. We can supply finished alloy steel castings with heat-treatment and machining process. 3. We can produce alloy Steel castings as per ASTM A27, GB/T 20878,DIN 17440,DIN 17224, AISI,ASTM,JIS SUH35,NF A35-572/584,BS970,BS1449,ISO 683/13. 4. The biggest steel castings we can achieve so far is 300 tons per piece. 5. Material Grade for Slag Pot

Material Grade	Alloy Steel, Carbon Steel
Quality Level	As per National Standard & International Standards
Production Process	Sand Process Heat-treatment Process

Chemical Composition	C (Max)	Si (Max)	Mn (Max)	S (Max)	P (Max)
ZG200-400	0.2	0.5	0.8	0.04	0.04
ZG230-450	0.3	0.5	0.9	0.04	0.04
ZG270-500	0.4	0.5	0.9	0.04	0.04
ZG310-570	0.5	0.6	0.9	0.04	0.04
ZG340-640	0.6	0.6	0.9	0.04	0.04

Heat-resistant Cast Iron

Chemical Composition	C	Si	Mn	P	S	Cr
Value	3.4-3.8%	1.5-1.8%	0.5-0.8%	≤0.1%	≤0.12%	0.5-1.2%

Packaging & Shipping

To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided. FAQ

1. who are we? We are based in Liaoning, China, start from 2008,sell to Domestic Market(40.00%),Southeast Asia(30.00%),South America(15.00%),Western Europe(15.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality? Always a pre-production sample before mass production; Always final Inspection before shipment;
3.what can you buy from us? Continuous Casting Machine, Low Voltage Products, PLC, Copper Pipe/Tube, Fiber Bearing
4. why should you buy from us not from other suppliers? Anshan Fenghui Continuous Casting Machine Manufacture Co,.Ltd has more than 15 years of experience in the field of melting, ccm and engineering field. we hace strong abilty of design and installation exprience. We sell Furnace, ccm, rolling mill. machines
5. what services can we provide? Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,CPT; Accepted Payment Currency:USD,EUR; Accepted Payment Type: T/T,L/C,D/P D/A,Credit Card; Language Spoken:English,Chinese.