650W Sparkler for Wedding and Events

Product Description

DMX and IR remote control spark machine for wedding and events
Features:
* With big motor inside to resolve the machine blocking problme
* Use chain design to replace the gear wheel to avokic the machine blocking
*With one key on remote controller to clean machine each time we finish using the machine
*The system contains no explosive content making it perfect for any indoor or outdoor events
*DMX address can be set up on digital dispaly

Machine Specifications:
Input volt:	110V/220V 50/60Hz
Shoot height:	1M-5M
Power consumption:	650W
control:	DMX control and remote control
Body material:	die cast aluminum
Powder tank volume:	300 grams
300 grams powder working time:	12-15 minutes
3 classes of height or remote control
5 classes of height for DMX control
Spark output diameter:	22MM (0.87 inches)
One key on remote control to clean powder inside achine
Body size:	185 X185 X 255MM
N.W:	6kgs
G.W:	15kgs ((2pcs/CTN)
Carton size:	61*30*32CM (2PCS)
Flycase:60*38*28CM	(2PCS) G.W: 22kgs
Flycase::60*51*45CM	(4PCS) G.W:40kgs
Powder Specifcations:
Green titanium powder,no pollution, no harm to health
Each bag: 200g. Last for 10 minutes
Outdoor powder, shoot height 1-5 meters
indoor powder, shoot height 1-3 meters

Security Notice
1) Storage environment
The machine must be keep in dry embient (the air humidity is below 35%), can not be exposed at outdoor place with high temperature (30 degree Celsius or higher) for long time.
2) Application environment
Water are not allowed in the machine, working together with machineds related to water and working in wet environment are forbidden
Make sure there is no obstructor at 7-8 meters place on top of machine. Keep the safe distance of 1.5 meter when watch the performance.
Don't use machine outdoor at very rainy or snowy day
3) Operation
1. Don't touch the top of machine or air outlet at side of machine at working time.
2. Any coverage on top of machine or spark outlet are forbidden
3. After performance over, please use up all powder or clean powder inside the machine. And keep the machine work for 45 second (no powder in side machine), then turn off and cut the power.