Electrostatic Epoxy Polyester Hybrid Powder Coating Black Ral9005 Wrinkle/Texture

Product Description

Product Description Electrostatic Epoxy Polyester Hybrid Powder Coating Black RAL9005 Wrinkle/Texture
COLORS AVAILABLE
RAL colors Pantone colors Color-matching is available GENERAL TYPES
Polyester /Hybrid powder coating color Epoxy Powder coating color Metallic powder coating color Hammer tone color powder coating Texture color powder coating powder Textures include sand grain, hammer, silk pattern, sand textured, wrinkle texture,metallic, multi-color.

PHYSICAL PROPERTIES
Specific gravity :1.2 ~ 1.8g/cm3 up to colors Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted) Level of liquidity:24 ~ 27 mm CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10 to 15 minutes

AVERAGE COVERAGE
7-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)
PACKING
Outside carton lined with two layers of PE bags, each containing 20 kg net weight or 25 kg net weight
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6 months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property
Testing items	Standards and methods	Inspecting index
Impact strength	GB/T1732-1993, AS3715 2.8	>50kg/cm
Bending resistance	GB/T1185-88, AS1580 402.1, ISO9227	Pass 2-5 millimeters
Adhesion CHECKED TEST	GB/T9286-88,2mm Cross cut, ISO2409	Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520	Erichsen, ISO1520	Pass 3-7 millimeters
Pencil hardness	GB/T6739-86, Mitsubishi	Pass H-2H

For more information about powder coating colors,please contact evercoatings.en.made-in-china.com
We offer free samples to you.
You can contact me