US$200.00-60,000.00 | 1 Piece (MOQ) |
Input Voltage | Single-phase 176V~264V, three-phase four-wire, phase voltage 175V~250V, line voltage 304V~456V |
Output Voltage | Single-phase 220V / Three-phase 380V |
Output Accuracy | 1~5% (Adjustable) |
Frequency | 50Hz/60Hz |
Effectiveness | ≥98% |
Responding Speed | ≤1.5s |
Ambient Temperature | -10ºC~+40ºC |
Insulation Resistance | ≥5MΩ |
Overload Capacity | Double the rated current for one minute |
Waveform Distortion | Pure sine wave output |
Protective Funtion Anti-interference/lightning strike Filtering Performance | Overvoltage, overcurrent, phase loss, and phase spike input 4000V pulse width 2s, output less than 2v, 25kA peak high current 0.4us impact 2 times frequency 0.15M~10G insertion loss, plug-in mode 70~100dB, common mode 100dB. |
Over and under voltage protection | When the input voltage exceeds the voltage regulator's over-voltage or under-voltage value, the equipment will automatically protect the no-voltage output. |
Over current protection | When the current exceeds the rated value, the input is automatically cut off. |
Overload, short circuit protection | When the load exceeds the specified overload capacity or short circuit of the equipment, the power supply can be automatically cut off within the specified time. |
Limit protection | When the brush operation exceeds the area, the adjustment is automatically terminated. |
Mains bypass function | When the voltage stabilizer needs maintenance or malfunctions, the manual switch can be switched to supply power in a direct connection state. |
True effective sampling circuit control | High accuracy, good sensitivity, good measurement rate and frequency characteristics, high input impedance, low output impedance, wide power supply range and low power consumption. |
Back to middle function | When the sampling voltage is lower than the lower limit reference voltage or higher than the upper limit reference voltage, the brush will automatically return to the center. |