US$5,000.00-19,000.00 | 1 Set (MOQ) |
Please Attention | ||
All the source water quality is not always the same. This is a short comparison between samples: | ||
Item | source water(Saltness) | Simple TDS(Total disolved solid) range |
1 | Tap water: 0.1-7mg/l | TDS range: 100ppm to 700ppm |
2 | Brackish/River water:0,7 to 10 g/l | TDS range: 700ppm to 10000ppm |
3 | Northern Sea close to estuaries :21 g/l | TDS range: 10000ppm to 21000ppm |
4 | Atlantic Ocean :35 g/l | TDS 35000ppm |
5 | Mediterranean Sea :38 g/l | TDS 38000ppm |
5 | Arabian Sea :45 g/l | TDS45000ppm |
6 | Red sea: 41g/L | TDS 41000ppm |
7 | Dead Sea :300 g/l. | TDS 300,000ppm |
Mark: Pls adivse your source water TDS,Iron, Manganese, Bacterials and etc. It is better make a water test report. so that design the ideal propsal. |
Pre-treatment | Feed water pump, Stainless steel 316L | Provide pressure for filters; |
Quartz sand filter | Remove suspended particle and large impurity. In this system; | |
Active Carbon Filter (option) | Remove the color, free chloride, organic matter, harmful matter, ect; | |
Anti-scalant system | To add chemicals to remove some impurities and prolong thememebranes using/washing time(prevent membrane blocking) | |
Manual/Auto control valves | Flushing sand/carbon filter after some time | |
5micron filter | Remove larger than 5 micro colloids in the water. In this system | |
1micron filter | Remove larger than 1 micro colloids in the water. In this system | |
Seawater RO Main Part | High pressure pump, Stainless steel 316L | Provide the high pressure to RO membrane; |
Ro membranes | More than 98% desalination rate, can remove ions except H2O. | |
CIP system | To washing the membranes when it is blocked after using for long time | |
Electronic control panel | PC controller or PLC and HMI controller |
HY-SWRO-8~9m3/hr(200m3/D) ro seawater desalination plant | |||
Flow rate | 160T/day | Recovery rate | 45% |
Applicable power | 380V/50HZ 3 phase | Rated power | 53KW |
Feedwater TDS | <45000ppm | freshwater TDS | <600ppm |
Working pressure | <6Mpa | operating temperature | 5-45ºC |
Feedwater residual chlorine | <0.1ppm | Feedwater SDI | <5 |
Feedwater turbidity | <1NTU | Feedwater PH value | PH 3-10 |
RO membrane housing | 8040-5 core,3piece | RO membrane | 15 piece |
Equipment specification | 7.5X1.2X1.65(m) L*W*H | Net weight | 2500Kg |
Packing specification(Plywood) | 7.5X1.2X1.65(m) L*W*H | Gross weight | 2800Kg |
Below is 20GP container capacity paramete | |||||
Model | Membrane model*qty | Capacity m3/D | Weight/kg | Operating Pressure/Mpa | Power |
HYSW-20GP-20 | 4040×8 | 20 | 2800 | 4.0-6.5 | 220V-440V/ 50Hz-60Hz |
HYSW-20GP-26 | 4040×10 | 26 | 2860 | 4.0-6.5 | |
HYSW-20GP-30 | 4040×12 | 30 | 2920 | 4.0-6.5 | |
HYSW-20GP-40 | 4040×16 | 40 | 3030 | 4.0-6.5 | |
20GP Container-frame: 20 ft according to ISO- standard (5.85x2.23x2.15 meter). | |||||
·suit for long-distance transport ·easy installation ·save space for customers More detail need customized according user requirement. |