LED Floodlight 130lm/W Road Project Lighting LED Spot Lights IP66 5 Years Warranty LED Lamp Outdoor 50W 100W 200W LED Flood Light

Product Description

Model NO.	Power(W)	Light Source	LED QTY (PCS)	Lens(PCS)	CCT(K)	Lumen(lm/W)	CRI
SLF20-13	30	3030(5050)	48/16	2	4000k	130/140	>70
SLF20-15	50	3030(5050)	64/32	4	4000k	130/140	>70
SLF20-110	100	3030(5050)	144/54/72	9	4000k	130/140/150	>70
SLF20-120	150	3030(5050)	192/256/96	16	4000k	130/140/150	>70
SLF20-120	200	3030(5050)	256/96	16	4000k	130/150	>70
SLF20-130	300	3030(5050)	400/150	25	4000k	130/145	>70
SLF20-140	400	3030(5050)	576/216	36	4000k	140/145	>70

Application
Commercial Lighting:Tunnel,Supermarkets,Large retailers,School,Billboard,Building etc.
Public Lighting:Tunnel,Airports,Stadium,Train stations,Bus stations etc.
Industrial Lighting:Manufacture Warehouses,Parking lots,Exhibition centers,Gas stations,Toll stations etc.
Features
IP66 waterproof/dust proof/explosion proof/IK09
Pure Aluminum shape good at heat dissipation
Angle Bracket,easy to install by drill
Easy replacement and installation
SMD 3030 Ra>70/SDCM<6
100,000 times switching cycle before failure
Total harmonic distortion(THD)<10%
Matters needing attention
Before installing the lighting fixtures, please read this instruction manual carefully.
The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations.
Lamps should always be installed or replaced carefully.
Please check the local voltage in accordance with the product requirements before installation.
Revamping only can be done when the power is off and the lamp is completely cooled down.
When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly.
Don't cover the fixtures with flammable materials.
Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.