| DUAL LEVEL MACHINE FOR YX5-103-1133 WALL CLADDING/YX24-250-1000 ROOFING |
| Material Specification |
| Thickness | 0.6mm to 1.2mm/0.3mm to 0.6mm |
| Effective width | 1133/1000mm |
| Feeding width | Approx.1220/1220mm |
| Material | PPGI |
| Yield strength | 250MPa |
| |
| Machine Components |
| 5Ton*1250mm Hydraulic Decoiler |
| Coil inner hole expanding | Hydraulic system, 3KW pump motor |
| Speed regulating | Frequency inverter, 3KW motor |
| Expanding type | Taper wedge expanding system |
| Load capacity | Max.5Tons |
| Coil inner diameter | 510±30mm |
| Coil outer diameter | Max. 1600mm |
| Stop/start rotation | Automatic stopping device with limited switch to assist |
| |
| Dual Level Entry Rollers and Manual Pre-shearing Device |
| Working thickness | Up to 0.8mm |
| Function | Smart cut control, to cut off the end of the final piece of sheet only |
| Option | Hydraulic pre-shearing device |
| |
| Dual Level Roll Forming Machine |
| Driving system | Gear/sprocket |
| Dual level forming | Upper level 16 stations, down level 20 stations |
| Roller material | 45# steel, CNC lathes, hard chrome coated |
| Shafts Diameter | Φ75/Φ95mm |
| Main motor | 15KW |
| Line speed of rollformer | Approx. 25m/min |
| |
| Hydraulic Cutting Device |
| Cutting type | No Blanking cut |
| Cutting tool material | Cr12, heat treatment |
| Hydraulci pump motor | 4KW |
| |
| PLC Control System |
| Function | Control the quantity & cutting length automatically |
| PLC | Siemens |
| Touch screen | Siemens |
| Inverter | Delta/Schneider |
| Encoder | Omron |
| Cut-to-length tolerance | ≤±2 mm |
| Control Voltage | 24V |
| |
| Product Rack | Un-powered, 3 units |