395mm Round Porcelain Wash Bathroom Basin Faucet Furniture Art Ceramic Sink

Product Description

About Ceramic Basin Bottom
Because ceramic products are semi-manual products, made of mud fired at high temperature, the capacity is affected by uncontrollable factors such as kiln temperature and weather, so they need to be objectively evaluated according to their characteristics. Ceramic products are produced and inspected in strict accordance with the "National Standard for Sanitary Ceramics GB6952-2005", and the product quality is high-quality products that meet the standards. Due to the difficulty of sanitary ceramic sanitary ware manufacturing process and large volume, after high-temperature firing, some ceramic basins may have pores and small cracks (also known as fire cracks) at the bottom or on the back surface of the porcelain body. This phenomenon is currently unavoidable. Similar phenomena will also appear at the bottom or back of individual toilets, squat toilets, urinals and other ceramic products. During quality inspection, we will use "plastic steel soil", "plastic steel slurry" or "other professional clay" for repair. Some ceramic products will have brown eyes or small bags on the glaze. These are normal phenomena and unavoidable, not quality problems, nor defective products. These do not affect the appearance, let alone use, and will not leak, and there will be no worries in the future. If you cannot accept the above situation, please do not place an order to avoid causing you unhappiness!