Custom Made Plastic Injection Molds and Moulding for Smart Security Cameras Components

Product Description

Plastic Moulds Apply to: Device Smart security cameras Plastic parts 1. **Camera Housing**: Usually made from ABS (Acrylonitrile Butadiene Styrene) or Polycarbonate (PC). ABS is favored for its durability and ease of molding, while Polycarbonate offers higher impact resistance and clarity.
2. **Mounting Bracket**: Often made from Nylon (Polyamide) or ABS. Nylon provides high strength and resistance to wear, while ABS is also used for its balance of strength and cost.
3. **Lens Cover**: Typically made from Polycarbonate (PC) or Acrylic (PMMA). Polycarbonate is chosen for its impact resistance and clarity, while Acrylic can offer high clarity and scratch resistance.
4. **Button or Control Panel Covers**: Often made from ABS or Polycarbonate. These materials are used for their durability and ability to be precisely molded.
5. **Battery Compartment**: Typically made from ABS or Polycarbonate, providing protection for the internal components while being resistant to environmental factors.
Injection Mould base: LKM Standard
Mould Steel: 1.2343/1.2344/1.2083 etc
Custom Plastic mould cavity: Single/Multi-cavity
Gate type: edge gate, J-gate, side gate, sub-gate(cashew gate, subsurface gate, submarine gate, subgate to pin) tunnel gate onto feeder post, pin gate, sprue gate, direct gate, tab gate
Cold Runner/Hot Runner: Synventive, Incoe, MoldMaster, Yudo, Husky,,
Mould for plastic:PI/PA/PEEK/PTFE/GFRP/PP/PC/ABS/PS/PA6/PA66
Plastic mold standard components: HASCO, DME etc
Tooling life: 1 million shots
In-house molding press sizes: 50-1000 tonnages
Design software: UG
File format: 2D(.dwg/.pdf) 3D(.stp)
Quality control: Implement the project engineer responsibility system/in the Design Stage/in material Procurement and Inspection/in the Manufacturing Process/in the Assembly and Fitting Stage/Inspection Before Delivery
Measure equipments: State-of-the-art Coordinate Measure Machine, 3D Scanner(GOM German)OMM projector longside hand-tool measure
Machining Equipments: 18 CNC(Mori Seiki, Fanuc, YCM) 9 EDM(AgieCharmilles MAKINO) 7 Wire-cut( AgieCharmilles)
Mold trial: in-house 10 injection molding machines, tonnage: 60-1000T, 4 2K and LSR injection machines
Mould manufacturing facility: 12 000 square meters
Professional team employee count: 70+ ( 15 project engineers, 35 design+CAM, 15 QC)
Certifications: ISO 9001, ISO 14001, ISO 13485, IATF 16949
Molding shop: 24 horizontal injection molding machines with robots, ISO 8 Clean room 5 molding machine(Toyo, FANUC)
Our Capabilities:2K mold, LSR mold, Insert mold, over mold, stack & tendam mold, IML mold, complex structure mold, Gas-assisted Forming Mold
Workers: 240