High-Accuracy Water Cool Chiller Refrigerated Air Dryer Stainless Plate Heat Exchanger

Product Description

Product Parameters

R410A					R407C					Discharge WB E6RON
Board replacement model B3-FLte Charge Motd B3-					Board replacement model B3-Pbte Change MorelB3
020A-	026A-	050A-	095A-	2008-	020A-	026A-	050A-	095A-	200B-	th
12D	14D				10D	12D				0.43
14D	18D				12D	16D				0.60
18D	22D				16D	20D				0.86
26D	30D	16D			24D	26D	140			.28
32D	38D	18D			30D	34D	16D			1.71
40D	46D	22D			36D	42D	20D			2.14
46D	54D	24D			42D	48D	22D			2.58
54D	64D	28D			50D	56D	26D			3.00
		32D					28D			3.43
		34D					32D			385
		38D	26D				340	24D		4.28
		42D	28D				38D	26D		4.71
		44D	30D				40D	28D		5.14
		48D	32D				44D	30D		5.57
		50D	340				46D	32D		6.01
		52D	360				48D	34D		642
		56D	380				52D	36D		685
		60D	40D				56D	38D		7.28
		62D	42D				58D	40D		771
		66D	440				62D	42D		8.14
		70D	46D				640	44D		8.56
			56D					50D		10.70
			66D	32D				60D		12.86
			76D	36D				70D		15.00
			86D	400				78D	38D	1,713
			108D	50D				98D	46D	2,141
			128D	58D				118D	54D	25.69
			150D	660				1380	64D	2,997
			172D	76D				160D	72D	3,425
				84D					78D	38.52
				940					88D	42.80

Plate heat exchanger is a new type of high-efficiency heat exchanger composed of a series of metal sheets (heat exchange plate bundles) with a certain ripple shape and a frame. The heat transfer plate and sealing gasket form a plate bundle, with corner holes at the four corners of the heat transfer plate. The sealing gasket and heat transfer plate are installed in the frame between the fixed pressing plate and the movable pressing plate, and clamped with clamping bolts. Plate and sealing gasket,Plate heat exchanger is a new type of high-efficiency heat exchanger composed of a series of metal sheets (heat exchange plate bundles) with a certain ripple shape and a frame. The heat transfer plate and sealing gasket form a plate bundle, with corner holes at the four corners of the heat transfer plate. The sealing gasket and heat transfer plate are installed in the frame between the fixed pressing plate and the movable pressing plate, and clamped with clamping bolts. Plate and sealing gasket,
Structural flowchart of plate heat exchanger:
1- Fixed clamping plate, 2- Connection port, 3- Shim, 4- Plate, 5- Active clamping plate, 6- Lower guide rod, 7- Upper guide rod, 8- Clamping bolt, 9- Pillar,
Seal the fluid channels and guide the fluid to flow alternately to their respective channel seals. These connecting pipes are aligned with the channel holes on the same plate and connected to the external pipelines of the two liquids for heat exchange. The heat transfer plate and the movable clamping plate are suspended below the top bearing beam and aligned and positioned by the bottom crossbeam.

Heating power H(KW)

R22

R134A

R410A

R4070

Discharge EEF uh

Board replacement model B3-Flate Cranye Motel B3-

Board replacement model B3-Fate Charge Mkdd B3

Board replacement model B3-Pbte Chanye Motel E3-

Board replacement model B3-Pae Chense Motdl B3-

020A-

026A

050A-

095A-

200B-

020A

026A

050A-

095A

200B-

020A

026A

050A-

095A-

2008

020A

026A-

050A-

095A

200B

3.0

10D

12D

10D

12D

10D

12D

14D

8D

0.52

4.5

14D

16D

14D

16D

12D

16D

20D

24D

0.78

6.0

18D

22D

16D

20D

140

18D

26D

32D

140

.03

9.0

24D

30D

14D

22D

28D

12D

20D

26D

10D

38D

46D

20D

1.55

12.0

32D

40D

18D

28D

36D

16D

26D

34D

14D

48D

60D

26D

2.07

15.0

38D

50D

20D

32D

44D

18D

30D

42D

16D

60D

74D

30D

2.58

18.0

44D

58D

22D

38D

52D

20D

36D

50D

8D

70D

88D

36D

3.10

21.0

52D

66D

26D

46D

60D

24D

42D

58D

22D

42D

3.62

240

60D

76D

28D

54D

68D

26D

48D

66D

24D

46D

413

27.0

32D

30D

28D

52D

32D

4.65

30.0

34D

22D

32D

20D

30D

18D

58D

340

5.17

33.0

38D

24D

36D

22D

34D

20D

64D

38D

5.68

36.0

40D

26D

38D

24D

36D

22D

68D

42D

6.20

39.0

44D

28D

42D

26D

40D

24D

74D

44D

6.72

42.0

48D

30D

46D

28D

44D

26D

80D

48D

7.23

45.0

50D

32D

48D

30D

46D

28D

84D

50D

7.75

480

54D

340

52D

32D

0D

30D

90D

540

8.27

51.0

58D

36D

56D

34D

54D

32D

96D

56D

8.78

540

60D

38D

58D

36D

560

34D

1000

60D

930

57.0

64D

40D

62D

38D

60D

36D

62D

9.82

600

66D

42D

66D

40D

64D

38D

66D

1,033

75.0

50D

46D

42D

82D

12.92

90.0

60D

30D

54D

28D

50D

28D

98D

42D

15.50

105.0

68D

34D

62D

32D

58D

32D

112D

48D

18.08

120.0

78D

40D

72D

38D

66D

38D

128D

54D

20.67

150.0

96D

48D

88D

46D

80D

46D

160D

68D

25.83

180.0

114D

58D

104D

56D

96D

56D

80D

31.00

210.0

132D

68D

120D

66D

112D

66D

92D

36.17

240.0

150D

760

138D

74D

128D

74D

106D

41.34

270.0

86D

84D

84D

118D

46.50

300.0

6D

94D

94D

132D

51.67

The working medium flows through narrow and tortuous channels formed by two adjacent heat transfer plates, and the inter plate flow channel of the plate heat exchanger is a variable cross-section and tortuous flow channel. The corrugated plate not only increases the turbulence level of the fluid, but also reduces the thermal resistance of the liquid film of the fluid; And it forms many support points that are sufficient to withstand the pressure difference of the medium. The use of thin plates with a thickness of 0.5-0.8mm reduces the heat transfer resistance on the wall surface, and there is no bypass, greatly improving its total heat transfer coefficient. When the Reynolds coefficient is greater than 10, the total heat transfer coefficient can reach up to 4000-6000W/(m2 · K). Cold fluid flow between plates in plate heat exchangers
Detailed Photos
Application scenarios of plate heat exchangers:
1. Refrigeration: used as a condenser and evaporator.
2. HVAC: Intermediate heat exchangers used in conjunction with boilers, high-rise building intermediate heat exchangers, etc.
3. Chemical industry: soda ash industry, synthetic ammonia, alcohol fermentation, resin synthesis cooling, etc.
4. Metallurgical industry: Heating or cooling of aluminate mother liquor, cooling of steelmaking process, etc.
5. Mechanical industry: cooling with various quenching fluids, cooling with lubricating oil for reducers, etc.
6. Power industry: High voltage transformer oil cooling, generator bearing oil cooling, etc.
7. Paper industry: Heat recovery in bleaching process, heating of washing solution, etc. Company Profile
Suzhou Hengliu Machinery Equipment Co., Ltd. is an enterprise specialized in manufacturing series of plate heat exchanger, The company has the abundant technical force, specializing in the production of removable plate heat exchanger, brazed plate heat exchanger, fully welded plate heat exchanger, heat exchanger plate, gasket; Its products are widely used in chemical, fertilizer, pharmaceutical, oil, steel, alcohol, food, beverages, printing and dyeing, electricity, painting, electronic screen, rubber, house heating, hotel and other departments, It also can meet the need of heating, cooling, condensation, heat recovery and various technological requirements.
The company now has a professional technical innovation team and professional after-sales personnel. The company′s has multiple professional and advanced CNC and automated production equipment, and has obtained a number of professional certificates and patents.
The company has a professional foreign trade team and has trade cooperation with various regions. Some global partners conducted on-site inspections of the production plants and were very satisfied with the inspection results and established long-term strategic cooperative relationships with our company.
Comparing to other other types of heat exchanger, plate heat exchangers have larger surface area. They are composed of a number of thin metal plates compressed together. Gasket is attached to the heat transfer plate with forms flow channel and acts seal up the fluid. Different materials have different channels and in their respective flow path alternately. They won't leak to the outside. The number of the heat transfer plate is determined according to the amount of fluid, physical properties of fluid,the pressure drop and thermal condition. Each plate is corrugated to increase the maximum heat transfer area.
Certifications
Our Advantages
After Sales Service
FAQ FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it takes 7-10 workdays to finish products(when the order quatities is smaller than 200 pcs) ,and it is 10 days by DHL or Fedex if the goods are ready for samples. or it is 15-20 days by sea according to the different countries.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for charges, after you confirm the drawings.
Q: Why choose Us?
A: We could make sure high quality and competitive price. OEM/ODM service is what we are good at Following fashion trend,our catalog will be updated regularly .
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.If you have another question, pls feel free to contact us !