100% Virgin Plastic F4 Polytetrafluoroethylene PTFE Rod

Product Description

Re: Polytetrafluoroethylene (PTFE) Rod
1. Features: There are three kinds of PTFE rods to offer. One is manufactured by paste extruding method in the diameter from 2mm to 4mm and the other is made by ram extruding method in the diameter from 5mm to 160mm; rods over the diameter 12mm to 350mm are manufactured by moulding.
PTFE is the most chemical-resistant and the best dielectric of all known plastics. It is not aging and binding. It can be used form -180ºC ~ +260ºC under no burthen circumstances. PTFE has the lowest coefficient of friction of all known solid materials.
2. Applications: Electrical insulation, seal and anti-sticking materials, etc.
3. Types and specifications:

Types	Diameter (mm)	Length (mm)
Pressed rod	2-4	Produced under requirements
Extruded rod	5-160	500-3000
Die pressed rod	12-350	100-1000

4. Main Properties:

Properties	Unit	Result
Apparent density	g/cm3	2.10-2.30
Tensile strength (min.)	Mpa	14
Crack elongation (min.)	%	140

*Note: when the diameter of rod is larger than 16mm, only test apparent density.
5. Package: Goods packed in plywood case.
6. Product Photos:
**Recommend Products:
FAQ
Q: Are you trading company or manufacturer ?
A: Both
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 5--15days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ?is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in advance ,balance before shipment.