Sludge Dewatering System Decanter Centrifuge Machine

Product Description

Product Description Sludge Dewatering System Decanter Centrifuge Machine When the machine starts running,the sludge is pumped into the screw press from the feed inlet port ,then enters into the flocculation mixing tank,and then gradually goes through screw shaft main body,and at last discharged from the sludge cake outlet port.Because the gaps between the screw shaft blades will gradually getting narrower,the sludge is bearing heavier pressure.Then the water is gradually dehydrated.Relying on the self-cleaning function of the fixed plates and the moving plates,block issue can be well avoided .
Our Advantages 1.Low operation cost:below 40% of belt press. 2.Power-saving:less than 5% of centrifuge. 3.Water-saving:less than 0.1% of belt filter press. 4.Saving-drugs:saving around 60%. 5.Compact:saving more than 60% of the investment for dehy-dration room. 6.Non-clogging:processing the facts & oils and fiber sludge perfectly. Sludge Dewatering System Decanter Centrifuge Machine

Models	Basket diameter (mm)	Rotation rate of basket (r/min)	Relative centrifugal force	Motor power(kw)	Productively M3/h	Weight(kg)	Dimension (L*W*H)mm
LW250x900	250	5400	4000	11	1-5	1050	1800*1200*600
LW360x1200	360	1200	4200	15	3-12	2100	2600*1580*1040
LW360x1500	360	4200	3550	22	3-14	2600	2900*1600*1040
LW420x1750	420	4000	3750	37/45	6-30	3500	3120*1580*1070
LW420x2100	420	4000	3750	45	6-35	4100	3450*1580*1070
LW500x2000	500	3800	4000	45/55	10-40	6500	3600*2300*1400
LW500x2500	500	3800	4000	55/75	12-45	7200	4100*2300*1400
LW550x1900	550	3200	3154	45/55	13-50	4600	3400*1810*1110
LW550x2400	550	3200	3154	55/75	13-55	5600	3900*1810*1110
LW650x2000	650	2650	2500	55/75	15-65	7100	4000*2300*1400

Detailed Photos