HS 2K Topcoat Extra Black 203 OEM Car Paint Refinish High Blackness Good Effect Auto Paint Lacquer Supplier

Product Description

We could bring the best quality, competitive price, soonest delivery and professional service to you!
2K Topcoat: Extra Black 203
Characteristics: High blackness, blue phase, suitable for single spray
2K Topcoat
1. Product features: TWO-component (2K) topcoat finish complete varieties, bright color, good covering power, good leveling, the use of supporting hardener and universal diluent can get bright film, color and light retention, high hardness, chemical resistance.
2. Application: Suitable for all kinds of vehicle coating or partial repair, can also be used in furniture and industrial products coating.
3. Suitable substrate: polished and completely dry and clean middle coat, old coat, epoxy primer and other surface coating.
4. Mixing ratio (volume ratio) : 100:50:10-15
5. Viscosity and time limit: Mix well before use. Adjust the viscosity to 13-15 seconds (4 cups, 20ºC). The time limit is 4 hours /25ºC.
6. Construction requirements: Use 1.3-1.5mm caliber spray gun, air pressure 3-5 bar, spray 2-3 monolayers, film thickness of about 30-50um, each spray interval of about 10-15 minutes.
7. Drying time: 30 minutes at room temperature without sticking dust, 2 hours to touch, 8 hours to assemble, completely dry solid for two days. Bake at 60ºC, non-stick dust for 5 minutes, 10 minutes can touch, 30 minutes can be assembled, 50 minutes completely dry solid.
8. Matters needing attention
(1) Each spray should not be too thick to avoid running, prickly heat or solvent holes.

(2) In order to ensure the spraying effect, please use special curing agent and diluent for 2K surface paint.
Car Paint, Auto Paint, Automotive Paint
HENGPU Chemical is professionally manufacturing high quality Automotive Paint and Car Paint.
Our full product ranges include the following:
A) Car Paint 2K topcoat
B) Car Paint 1K basecoat, Metallic,Silver
C) Auto Paint 2K high solid clear coat
D)Auto putty
E)Automotive 2K primer and 1K primer
F) Automotive Paint Binders and fixatives
G) Automotive Paint Related hardener, thinner and other solvent
Substrates Dried and sanded existing finishes, 1k or 2K Primer
Surface Cleaning Remove wax, silicon and other contaminations with degreaser.
Mixing Ratio
below 18 degree
2K Solid Colors 100 parts
Fast Drying Hardener 50 parts
Thinner 10-30 parts
18-24 degree
2K Solid Colors 100 parts
Standard Hardener 50 parts
Thinner 10-30 parts
25-30 degree
2K Solid colors 100 parts
Standard Hardener 50 parts
Thinner 10-30 parts
Above 30 degree
2K Solid Colors 100 parts
Slow Drying Hardener 50 parts
Thinner 10-30 parts
Pot Life: 2 hours, 25 degree; 4 hours, 25 degree
NO. Of Coats 2-3 coats, 40-60um
Flash-off time At 25 degree, 5-10 minutes between coats, allow 15-20minutes flash-off time before baking
Sandability and Polishabiility Dust particles and minor damages or sagging area can be sanded out with P2000 paper wet after the finish is completely dry. Compound and polish to restore gloss.
Spray Gun &
Pressure Gravity Feed 1.2-1.5mm 3-5kg/cm 2
Siphon Feed 1.4-1.7mm 3-5kg/cm 2
Drying Time Temperature Dust Free Tack Free Dry to Handle Thorough Dry
25 degree 45 minutes 2-3 hours 10 hours 7 days
70 degree 5 minutes 10 minutes 25 minutes 60 minutes
Shelf life 2 years in original sealed can at cool and dry place at 20 degree
Packaging 1L, 2.5L, 3.75L, 4L, 5L
Auto Paint, Car Paint, Automotive Paint
Car Refinish, Auto Refinish ------

Substrates	Dried and sanded existing finishes, 1K or 2K Primer
Surface Cleaning	Remove wax, silicon and other contaminations with degreaser.
Mixing Ratio	below 18 degree 2K Solid Colors 100 parts Fast Drying Hardener 50 parts Thinner 10-30 parts			18-24 degree 2K Solid Colors 100 parts Standard Hardener 50 parts Thinner 10-30 parts
	25-30 degree 2K Solid colors 100 parts Standard Hardener 50 parts Thinner 10-30 parts			Above 30 degree 2K Solid Colors 100 parts Slow Drying Hardener 50 parts Thinner 10-30 parts
Pot Life	2 hours, 25 degree; 4 hours, 25 degree
NO. of Coats	2-3 coats, 40-60um
Flash-off time	At 25 degree, 5-10 minutes between coats, allow 15-20minutes flash-off time before baking
Sandability and Polishabiility	Dust particles and minor damages or sagging area can be sanded out with P2000 paper wet after the finish is completely dry. Compound and polish to restore gloss.
Spray Gun & Pressure	Gravity Feed 1.2-1.5mm 3-5kg/cm 2 Siphon Feed 1.4-1.7mm 3-5kg/cm 2
Drying Time	Temperature	Dust Free	Tack Free		Dry to Handle	Thorough Dry
	25 degree	45 minutes	2-3 hours		10 hours	7 days
	70 degree	5 minutes	10 minutes		25 minutes	60 minutes
Shelf life	2 years in original sealed can at cool and dry place at 20 degree
Packaging	1L, 4L,1Gallon, 20L