11.8FT 3.6m Aluminum Hull Rhib Hypalon Inflatable Boat Rubber Boat

Product Description

11.8ft 3.6m Aluminum Hull RHIB Hypalon Inflatable Boat Rubber boat

Accessories	Aluminum paddle,pump,repair kit and seat
Boat length	230,270,300,330,360,380,430,470,500cm

Size	Chamber	Net Weight (kgs)	Max HP	Max Load	Max Person	Tube Diameter
230x133	3+1	38	4	350	2	36
250x152	3+1	42	6	440	3	36
270x152	3+1	48	10	484	4	36
290x152	3+1	52	10	510	4	38
320x153	3+1	66	15	566	5	38
360x168	3+1	68	20	689	6	42
380x170	3+1	76	20	727	6	42
420x190	3+1	88	30	1087	7	46
460x190	3+1	100	40	1108	8	46
500x208	5+1	118	40	1300	10	50
600x208	5+1	145	50	1400	12	55
800x220	5+1	170	80	1800	20	60

FAQ 1.What kind of guarantee you can be given?
We guarantee all the product will be good at least 3 year;
defective products will be changed by a free replacement after confirmed because of Quality problem.
2.What kind of wear and tear should I watch for?
Besides a small leak or tear you should check around all the valves and seams once in a while to make sure they are secure and not leaking any air.You can do this by using soap and water mixture in a spray bottle.
Other wear and tear to be aware of is any breaking down of the material or stains that should eventually be removed with a
cleaner.
3.How should I store it?
Store it in a dry place away from direct exposure to hot sunlight or cold conditions.
Deflated and rolled into its carry bag, it can be stored in any small space such as in a closet or garage.
The important thing to remember is to make sure it is completely dry before packing it away so you don't end up with mold and mildew to clean up later.
4.How long does an flat surfboards take to inflate?
With a hand pump,it will take about 4 - 8 minutes. With a good electric pump it can take 30 seconds to 1 minute.the barometric needle points to 15PSI
5.What should I pay attention to when using it for the first time?
After receiving the sup, please check if the product is damaged due to transportation, and make sure it is inflated before it is damaged.
1. The first charge is recommended to inflate 80% and put it for 8 hours (spring, summer, autumn and winter) and put it into use.This can effectively extend the service life of the inflated product due to the need for a buffering process inside the product.
2. The temperature in winter is low. Although the cold resistance index of our products reaches the market standard, PVC products will become hard and brittle at low temperatures during the delivery process. In order to prolong the service life of the products, it is recommended to be placed indoors for more than 24 hours. Re-inflate, otherwise it will easily cause rupture at the crease and cause air leakage.