C310/0020/STD ABB Redundant link module stock

Product Details

Product Description

Product Description
C310/0020/STD ABB Redundant link module stock
C310/0020/STD ABB Redundant link module stock
Our Email: 2235954483@qq.com
contact number:13313705507
contacts：HE
Feed-Through Assembly vents do not have filters, but require vent tubing to be
attached and routed accordingly. These are:
• 2 Column Vents (CV1 and CV2)
• 1 Sample vent (S1, S2, S3 and S4)
• 1 Gauge Port Vent (GPV)
1.3.4 Analytical Module
The modular design of the analytical module (P/N 2102172-xxx) is enhanced by
the single bolt removal feature. This module may also be broken down into the GC
module (P/N 2102033-xxx), manifold assembly (P/N 2102149-xxx) and analytical
processor assembly (P/N 2101831-xxx). The GC module also features single bolt
removal.
The analytical module comes in two configurations: 12V and 24V.
Of the subassemblies that comprise the analytical module, GC module and
manifold assembly come in two configurations: 12V and 24V.
In Figure 1—9 the user can see the analytical module assembly removed from the
enclosure.
1.3.4.1 Features
• High-speed Serial Interface to Digital Controller Board
• 32-bit Digital Signal Processor
• Flash Memory
• Analog to Digital Conversion Circuits
• Digital Oven Temperature Controller
2101510-002 – rev. AD Page 1–11
• Digital Auxiliary Heater Controller (optional Feed-Through Heater)
• Dual Digital Pressure Regulators
• Sample Pressure Sensor
• Pressure Sensors (100 PSI max.)
• Thermal Conductivity Detectors
• System Level Voltage Monitoring
• Analytical Processor Board Level Temperature Sensor
• LED Board Status Indicators