PTFE Sealing Tape Production Line

Product Description

Pushing machine/rod pushing machine: 1 Small tubes/rods can be produced multiple times, up to 35 millimeters 2.Fully automatic feeding: The difference between our automatic feeding and market automatic feeding is as follows 2.1 Market automatic feeding is the process of manually adding materials to the hopper. After use, it needs to be manually added again without any alarm reminders. 2.2 SUKO fully automatic feeding: 2.2.1 Automatic feeding bucket: Two bags of material weighing about 50 kilograms, made of 304 stainless steel, can be used for 6-8 hours at a time; 2.2.2 Vacuum feeding, made of 316 material, automatically delivers the material to the material tray of the equipment; 2.2.3 The material drum includes a mixing system to prevent bridging of PTFE powder, as PTFE powder has poor fluidity and is prone to bridging; 2.2.4 The vacuum feeding height can reach 6-8 meters, and the material barrel is placed on the first floor, directly sucking the material onto the equipment on the platform; 2.2.5 When the material in the material barrel is too low, the equipment will automatically alarm and prompt for feeding; 2.2.6 The tray sensor ensures the storage capacity of the tray material; 2.2.7 Three color light: green running, yellow alarm, including material shortage and faults, red stop; 2.2.8 The feeding time and quantity can be controlled separately. 3. The equipment is equipped with a water cooling system, and the hydraulic station is water-cooled. Prolonged operation can cause excessive oil temperature, ensuring normal operation. The mold core rod water-cooling system ensures the normal use of the mold core rod. The material tray is water-cooled to ensure that the materials enter the mold normally. 4. The control cabinet is controlled separately to prevent high temperature from accelerating the aging of components and circuits, reducing the lifespan and stability of the equipment. 5. Special processes for mold use

Voltage	380v OR AS TAILOR-MADE
Year	2021
USE 1	membrane filter/ Human blood vessels
Material	PTFE
use 2	PTFE FILTER PIPE
use 3	BLOOD VESSLES
use 4	PLASTIC TUBE FOR SPECIAL ENVIROMENT
Core Components	PREFOREMR EXTRUDER DEOIL SINTERING

FAQ
Q1: Mhere is your factory? Can l visit your factory? Our factory is located in Jiangsu, China. We warmly welcome customers at home and abroad tovisit us. Q2: How about your machine quality? A: We have own research and development team, rich experiences technicians,and professionalworkers.We pay attention to every detail in manufacturing toensure machines with high quality. Q3:How can l contact you? A: Please look at my contact card.You can talk to me anytime.Or send me enquiryemail, l willreply you in 24 hours and offer the optimum solution to you. Q4:Can you supply the construction and operating services ? A:Yes, we can provide services including design, manufacturing, procurement,installation,construc-tion and operating. Q5:How about your lead time? A:lt depends. Usually, the delivery time is within20-30 days upon receipt of your deposit and confirmation of all product Q6: What are your advantages? A: the same product -- lower pricethe same price -- higher qualitythe same quality -- better service