Model | A8-2060-C8 |
Working area | 2000*6000mm |
Z feeding | 400mm |
Frame structure | Steel casting-welding |
Type of table cover | Vacuum table with T-slot |
Vacuum pump | 5.5kw air cooling |
Z axis transmission | Ball screw and 25 square guide rails |
X Y axis transmission | 25 square guide rails + Helical rack |
Max. Rapid Travel Rate | 45000mm/min |
Max. Working Speed | 30000mm/min |
Command Code | G code * .u00 * .mmg * .plt |
Operating voltage | AC 380V/50Hz |
Spindle power | HQD 9.0 KW |
Spindle rotate | Left and right 180 degree |
Tool Magazine | 8 - 12 |
Type of cooling | Air cooling |
Spindle Speeds | 0-24000rpm/min |
Drive motor type | Syntec 1000w servo motor with drivers |
operating system | Taiwan SYNTEC 60WE |
Dust Collector | 3kw with double bags |
Lubrication system | Automatic |
Supported software | Artcam software, Type3 software |
Operating conditions | Humidity: 30% -75%, temperature: 15 - 45 degree |
Warranty | Two years |